Yes, have already deleted it
Yes, have already deleted it
Or just add a service in the Zapper.
https://github.com/OpenViX/enigma2/b...ders.py#L2-L29
To avoid confusion (albeit some of files are identical)
OE-A teams and OpenPLI build CrossEPG downloader from here:
https://github.com/oe-alliance/e2openplugin-CrossEPG
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................
Vu+ Uno4KSE, Dreambox dm900
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
ccs (13-10-21)
For UK Sky EPG I just have a daily timer that runs at 6am for 15 minutes to record the IEPG channel. The recording destination is the trash folder so that the recording is instantly deleted. This populates my EPG. I put my box into deep standby overnight so this timer wakes up the box and when the recording is finished goes into standby. A power timer then kicks in where if the box is in standby for 10 minutes it is switched to deep standby.
iepg_a.jpgiepg_b.jpg
You would have to modify the timer to record from the channel from which you obtain the epg
Last edited by adm; 13-10-21 at 23:19.
Xtrend ET10K, 2 x satellite tuners 28.2 (Sky FTA), 2 x hybrid (UK Freeview), Zgemma H9S (satellite)
Because I wasn't sure that they would operate from deep standby.
A few times a year I'm away from home for a two or three week period and the only time my box would be switched on (into standby) would be when a record timer kicked in. I also have a fair number of autotimers that search the epg to set the timers. If I'm not at home my box is configured to go back into deep standby soon after a recording finishes.
I already had a few power timers.
One puts the box into standby at 30 minutes past midnight, one puts the box into standby if I haven't touched the remote for 2 hours and a third puts the box into deep standby if the box is in standby for 10 minutes (all can be manually overridden or automatically delayed if a recording is taking place)
Xtrend ET10K, 2 x satellite tuners 28.2 (Sky FTA), 2 x hybrid (UK Freeview), Zgemma H9S (satellite)
So I added this change, but unfortunately on the reload whether I use the epg patch or crossepgImportEPGv21 patch in epgcache to reload it does not work. The 1st method creates an epg.dat that epgcache refuses to read (message:-epg file has incorrect byte order.. dont read it) and the latter crashes badly in eEPGCache::crossepgImportEPGv21 trying to read the created db - it obviously passes the 1st checks but then trying to process the data it crashes.
Hard to tell whether the data is corrupt or the database format is incorrect or both.
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................
Vu+ Uno4KSE, Dreambox dm900
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
I've just started using OpenTV epg as it's stated cross epg does not work in python3 but it seems to have very limited options as to when the downdload should start. I have a fixed 28.2 dish and a motorised and OpenTV usually just moves the dish to 28.2 to start the download but I have no control as to when this happens. Could a 'start time' be added and a 'once a day' option and maybe 'in standby only'?
A download will happen 3 minutes after a reboot if a tuner is available. If not you can force it via the blue button menu. Apart from that a download happens every several hours depending on how you have it configured. It was a conscious decision not to have a specific download timer.
Please explain exactly why you would need this. What problem are you trying to solve?
I have set it to download every 12 hours but I go to a channel on say 30.0W and find the dish is at 28.2 because it's done a download. It takes a while to move back! Maybe return to previous sat would be one option?
If you leave the stb on a channel on 30W whe you are not using it (or other satellite on the motorised dish) then the fixed dish will be used for updating epg data (as long as that tuner is free).
Zgemma H7S running OpenVIX 6.2, Darkmotor, Triax TD110 dish, Inverto Black Ultra dual lnb
LG 50UM7450 4K TV, Pioneer VSX-534 Atmos AVR , Panasonic UB820 region free 4K Bluray & a PS4.