Same thing happening here for me. I just decided to give 5.4.014 a whirl (was on 5.3.039). Flashed it to slot 2 and setup my preferred skin. Did a pause on live TV and it paused just fine but the play button does not work to play the paused program :-(
Can someone point me in the right direction on how to find out whether there is a bug report for this please.
Not sure if this will help anyone looking into this but I tried to put my H7 to "Deep Sleep" some time after I had been trying to pause then play a timeshift (and after cancelling it and saying "Don't save/Don't record"). I was hit with an error saying "thre are recordings currently running or about to start. I checked my Autotimers and also my Timers and my File List and there were no timers due until 4 hours later and no recordings currently in progress that I could see. I have a suspicion that the ending of the timeshift does not end properly and the system thinks it is still running on those occasions when it is going to refuse to play a timeshift in pause mode. For me, it is not every time but only "sometimes" and I can't pin down on what occasions it will behave and on what occasions it will refuse to start to play again when paused. Other times I can pause/play a timeshift; end the Timeshift and then 10 seconds later I can press pause again and the timeshift kicks back in and plays just fine. Other (seeming random) times it will just pause and not play until I change channels and then it kisks back to life.
Last edited by smipx; 28-09-21 at 13:37.
@smipx - I have noticed this issue on occasion. I shut my GB Quad+ into deep standby each night before going to bed. If I have been using timeshift beforehand and saving (or not saving) recordings, then sometimes I will get a message saying that recording are running or about to start. When I check recording schedule there are none due. If I acknowledge the message and shut down, the box will reboot shortly after. A second shut down is successful. I haven't reported it as a bug as I can't replicate it consistently.
GB Quad Plus, Mut@nt HD51, AX HD61, 80cm dish and Supreme Dark motor. Sony STR-DN 1060, Sony UHP-H1 Bluray, Odroid N2+ (CoreElec), Monitor Audio Bronze 5.1 speakers
Mick Seymour (28-09-21),smipx (29-09-21)
Just for my info. Where can we see a list of all the outstanding issues/bugs and their status?
Thanks
Paul
I don't think there is one, I've certainly not seen one.
Try
https://www.world-of-satellite.com/s...5-4-Change-log
http://www.openvix.co.uk/feeds/openv...5.4/e2-git.log
http://www.openvix.co.uk/feeds/openv...5.4/oe-git.log
Last edited by ccs; 29-09-21 at 11:01.
Thanks CSS.
It's a shame (from my point of view) that there is not a nice list of reported "bugs" that are being worked on / been acknowleged.
I have come across a few bugs but I don't currently have the time to gather logs and create a post each time (if I am not sure its not already been reported and/or acknowleged).
e.g. one bug I found yesterday was when inside the list of recordings I wanted to change the action of the yellow button to "select" so I could select a bunch of recordings. I made the change in the menu and then next time I went into the movie list the box crashed and kept crashing. No way to remove the "not working assignment" other than to go into the config file, find the offending line and remove the setting. I did this - rebooted and it was fine again. It would take me hours to log that as a problem, try to gather the logs and submit them and then, after all of that effort get someone telling me "it's a known issue and is in the fix list". I just don't have the time but - on the other hand I do want to try and help iron out the bugs.
Another issue was that I was using the MovieOrganizer plugin previously (and it worked very well) but when I installed 5.4.014 I decided to avoid any 3rd party plugins that were not tested and maintained in the Downloads section and instead try to use the built-in "Enable Automatic Collections". Now at the moment I have the list of movies sorted (done by MovieOrganizer) into folders at the top (by the date the folder was created I think) and then individual recordings at the bottom by date (newest at the top of the list of individual files). When I tried to use "collections" the "virtual folders" were interspersed with the individual files and there seemed to be no sort option to make all of the "virtual folders" appear at the top and then individual files by date ascending under them. I just gave up and installed MovieOrganizer manually from an IPK and got back to what I am used to.
... changing the yellow button to "toggle mark" in movielist crashes 5.4.014 (didn't take long)......
Code:12:31:09.7532 [eRCDeviceInputDev] emit: 0 12:31:09.7601 [InfoBarGenerics] Key: 399 (Break) KeyID='KEY_GREEN' Binding='('GREEN',)'. 12:31:09.7741 [Trashcan] Debug path /media/hdd/movie/ => /media/hdd/movie/.Trash 12:31:10.0006 Traceback (most recent call last): 12:31:10.0008 File "/usr/lib/enigma2/python/Components/MovieList.py", line 312, in selectionChanged 12:31:10.0012 File "/usr/lib/enigma2/python/Screens/MovieSelection.py", line 1063, in updateButtons 12:31:10.0018 TypeError: can_mark() takes exactly 1 argument (2 given) 12:31:10.0019 [ePyObject] (CallObject(<bound method MovieList.selectionChanged of <Components.MovieList.MovieList object at 0x71aac7d0>>,()) failed)5.4.014
:-) not if you know what you're doing and do it often. For me it's a mission each time I have to get debug logs etc. Bit of a noob on that :-)
Problem is that this software is maintained by unpaid volunteers. If we all decided it took too long to document and submit a bug report potentially nothing would ever get fixed. Easy way is to create a post and ask if it is a known problem. If it isn't then you should take the time to submit logs and any other diagnostic information. We get the software free so we should all try to help out where we can.
Joe_90 (30-09-21),Mick Seymour (30-09-21),ronand (30-09-21),smipx (30-09-21),Willo3092 (29-09-21)
Hi Tkr001,
I hadn't appreciated or understood that fact so I unreservedly apologise to all the volunteers who work so hard to make OpenVIX.
I will do as you suggest. The idea of a list of already "being worked on" or "acknowleged" bugs/behaviours in a format/place that the "less technical" of us can look at (and have ahope of understanding) is still a good idea though. In some ways it might take the pressure off the hard working volunteers (rather than create more work) and avoid what must be annoying posts about things that are already known about. Sometimes a bug can take many forms and one symptom may not be immediately obvious by trawling through previous posts so it would help on that side too.
Just an idea.
Apologies again,
Paul
Tkr001 (04-10-21)
As the OP, I'm very happy that the problem is being looked at and fully understand the devs are volunteers and passionate about what they do. I love my ZGemma with OpenVIX.
smipx (30-09-21)
Have a go with this:
https://github.com/OpenViX/enigma2/c...cf4faf9043f5ba