I see Abu has fixed this on github.
Thanks - I was about to start searching for which repository it was in.
I see Abu has fixed this on github.
Thanks - I was about to start searching for which repository it was in.
MiracleBox Prem Twin HD - 2@DVB-T2 + Xtrend et8000 - 5(incl. 2 different USBs)@DVB-T2[terrestrial - UK Freeview HD, Sandy Heath] - LAN/USB-stick/HDD
Are these "Taskhash mismatch" errors I keep getting recently when building something I can ignore?
I get 17 of them but the build still seems to complete and it produces image files.
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................
Vu+ Uno4KSE, Dreambox dm900
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
Samba has always been problematic - often not problem after a new Vix update but then sometimes it will not install or start..
The work around is usually...
Install the Vix image
On reboot set-up video and basic network connection - do NOT restore anything, no scan for channels etc.
Go to network -> utilities -> samba
You will get the message
Are you ready to install packagegroup-base-smbf-server?" with the option Yes and no.
It probably now will install
After a reboot you can restore your settings.
Check that samba is running and autostart is enabled.
If you are doing something different with your own build just try and install samba before a restore of any settings.
Xtrend ET10K, 2 x satellite tuners 28.2 (Sky FTA), 2 x hybrid (UK Freeview), Zgemma H9S (satellite)
.... you'll almost certainly need an opkg update before installing samba, but I reckon it's his plugin build that's got a problem with samba.
There is no need to build the image each time - you can do an online software update on the dev build
Zgemma H7S running OpenVIX 6.2, Darkmotor, Triax TD110 dish, Inverto Black Ultra dual lnb
LG 50UM7450 4K TV, Pioneer VSX-534 Atmos AVR , Panasonic UB820 region free 4K Bluray & a PS4.
I do make update before I do make image
I think I may have deleted something I thought was just a cache because the virtual machine for the build environment was filling up.
So I restored an old backup of the virtual machine.
But then I found the batch file I thought was correctly copying stuff from the virtual machine to my new separate web server I wanted to use for my feeds wasn't copying everything across, the logic to avoid re-copying files that were already present and up to date was wrong. It worked the first time so I wrongly assumed it was correct. But when I updated and did another build some stuff in my feeds was left from the previous build.
That was why samba wouldn't install. The packages.gz did not match what was available in the feeds. The .ipk files seem to come out slightly different sizes even if, as far as I can see, they contain exactly the same version of a package.
Can I set up a separate build environment for ViX 5.5 but still be able to build ViX 5.4 on the same PC or does it mess up any core files?
you can create multiple build environments on a PC. I tend to keep them on different HDD's so its easier to control, but you don't have to do that.
What you cannot do is run both at the same time as Bitbake always complains! - I guess there may be a way (?), but builds tend to be so CPU intensive it would be counter productive
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................
Vu+ Uno4KSE, Dreambox dm900
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
Willo3092 (29-07-21)
I am presuming that you followed the OpenATV guide where they say
mkdir -p ~/openatv
cd openatv
git clone git://github.com/oe-alliance/build-enviroment.git -b 5.0
You would then be cloning 5.0 branch into the openatv directory. The instructions were the same for older branches and that is why I presume you are asking the question as you are cloning into an existing directory
What LraiZer advised/suggested a few years ago was to use a directory named by the branch that you are cloning.
So, instructions would beCode:Link removed. Forum rules, 6. No links to private forums, satellite forums or links/requests about porn sites to be posted
mkdir -p ~/oe-a-5.0
cd oe-a-5.0
git clone git://github.com/oe-alliance/build-enviroment.git -b 5.0
As you are cloning the branch, to me it makes sense to use branch names.
Last edited by Huevos; 29-07-21 at 17:57.
Willo3092 (29-07-21)
I haven't actually done it yet. I wanted to make sure I wasn't going to cock up my 5.4 environment which, touch wood, has been trouble free lately.
So basically log in and you will be in you user folder. i.e.
Now create 5.4...Code:/home/myuser
That will give you your 5.4 build env in /home/myuser/5.4 ...Code:git clone https://github.com/oe-alliance/build-enviroment.git -b 4.4 5.4
Now create 5.5...
That will give you your 5.5 build env in /home/myuser/5.5 ...Code:git clone https://github.com/oe-alliance/build-enviroment.git -b 5.0 5.5
-----------------------------------------------------------------------
Now move your "sources" folder to /home/myuser/sources.
Then modify "site.conf" in both build folders to point at the sources folder.
Code:DL_DIR = "/home/myuser/sources"
Willo3092 (29-07-21)
Look at bottom of page:
https://github.com/OpenViX/enigma2/t...on3-compatible
Last edited by Huevos; 29-07-21 at 17:58.
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................
Vu+ Uno4KSE, Dreambox dm900
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
Willo3092 (29-07-21)