Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Results 1 to 1 of 1

Thread: Setting up a Spiderbox

  1. #1

    Title
    V.I.P
    Join Date
    Mar 2010
    Posts
    1,357
    Thanks
    553
    Thanked 392 Times in 207 Posts

    Setting up a Spiderbox

    No credit taken for the below... Thanks to the author.

    How to setup, easiest way possible!!!!
    ===============================

    USALS motor setup
    • Connect all cables.
    • LNB cable to LNB in
    • HDMI or Scart connected between the TV and the spiderbox
    • Network cable connected. One end to the spiderbox and the other to a suitable router.
    • Turn it on There IS a switch at the back.
    • press the power switch in your remote control to turn it on.
    • Press the menu button.
    • Select the Installation section by scrolling right/left
    • Go to motor setup, press OK
    • Enter pin code "0000"
    • Press the green button to allow you to enter your longitude and latitude.
    • Longitude is switched between E & W by pressing the < and > buttons.
    • Enter your longitude by using the number keys. Note: if your Longitude is 1.5W (for example) you must enter 001.5W in this field.
    • Enter your latitude, e,g, 55.6N. You can change N to S with the arrow keys too, but most of you won't want to do that.
    • Scroll down to save and press OK.



    Apply a patch:
    ================

    Get a USB stick.

    Download a patch from here...
    Code:
    http://www.vuplus-support.co.uk/forumdisplay.php?102-Spiderbox-7000-HD-Patches-Gift
    • EXTRACT the file (*.uad) from the rar file and copy it to your USB stick.
    • You must extract the file using winzip or winrar or a similar program as the rar file on a USB stick will not be of any use to you.
    • Insert the USB stick into one of the USB ports in your spiderbox.
    • Go to the Accessory Section of the menu and select USB.
    • Scroll to the .uad file you have copied there and press OK
    • In the popup window, select S/W Update
    • Wait for your box to load the patch.. DO NOT POWER OFF
    • The box will reboot by itself with the new patch installed.


    Finally, you can Apply a settings list...Can be found at the below.

    Code:
    http://www.vuplus-support.co.uk/forumdisplay.php?105-Channel-Lists

    Good luck.....Now to try it myself

  2. The Following 4 Users Say Thank You to bobonthejob For This Useful Post:

    chris76 (01-02-11),evans20 (09-07-11),Sicilian (15-06-10)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.