chris - can you provide photos of your motor setup when the dish is pointing south (at zero on the motor) and also when it is pointing at 0.8W. Your south (with motor at zero) is 1.3E (as that is your longitude). When you select a channel on 0.8W, the motor will turn 2.1 degrees to the west in order to point at 0.8W. Two degrees on a motor will take less than a second. You would barely notice the turn. As redrobin posted, your adjustments, when needed, will be tiny. In some cases, tightening one side of the motor U-bolt will bring a weak satellite in.