IMG_20201014_070815.jpg
Have problem flashing openvix-5.4.001.release-zgemmah9s_usb using image manager, comes with error, and reboot in latest version, help!
IMG_20201014_070815.jpg
Have problem flashing openvix-5.4.001.release-zgemmah9s_usb using image manager, comes with error, and reboot in latest version, help!
I had similar thing happen to my friend. I ended doing a usb flash for him.
You got enough storage space etc.
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
widar (14-10-20)
Have 15 Gb free space on my usb HD, thank you for quick reply
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................
Vu+ Uno4KSE, Dreambox dm900
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
widar (14-10-20)
For info only
I've just upgraded from 5.3.039 to 5.4.001 on a H9S using the menu -> setup -> vix -> image manager method over wi-fi
The box has a SD card (not used at present) and a 128G USB stick (100+G free)
The flash was successful.
The restore of settings complained that I didn’t have a network connection possibly due to wi-fi not being setup at the time of the message but afterwards the plug-ins seemed to have been downloaded.
The only problem that I see is the long standing SAMBA problem where it says it needs to be downloaded and after OK-ing this message then resets the box only to find that it is not installed and the message/reset is repeated……...
I know from previous experience that the way around this is to install SAMBA before a restore of settings which will mean I have to manually set up the wi-fi again.
Xtrend ET10K, 2 x satellite tuners 28.2 (Sky FTA), 2 x hybrid (UK Freeview), Zgemma H9S (satellite)
widar (14-10-20)
My procedure (different box) using wifi only is to use image manager to flash, restore settings (no plugins are restored as no wifi configured yet (it tells you this)), and after the automatic reboot I restore settings again using backupmanager. Wifi, Samba, and everything else is then running as expected.
If you need to download the wifi driver to get it running, life gets complicated, you need a (temporary) ethernet connection.
Last edited by ccs; 14-10-20 at 12:54.
The reason for the image version question on post #4 is that ofgwrite had difficulties (since fixed) when both ubi and tar.bz2 rootfs were added to the usb.zip
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................
Vu+ Uno4KSE, Dreambox dm900
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
Hi it was from 5.3.039 to 5.4.001, and I am not aware of any sd card, did a usb install the first time, and soft upgraded after that, I have a solo2 also, did the same thing on that, without any problem. I am not sure of if there is a sd card, or how to use that.
I can always try to usb flash, but I think it is easier to use imagemanager.
When you restore settings again from backup manager, you are first asked if you want to restore the backup, and then to restore settings.
If you answer no to settings, plugins are still restored. Tested on 5.4.002, but maybe it has always been that way.
(Double restore usually only needed when using a wifi connection.)
widar (06-11-20)