Screenshot 2020-09-23 192238.jpg
this is what I'm getting.
Screenshot 2020-09-23 192238.jpg
this is what I'm getting.
I'll have to refer to Grog68 for that. He'll have to update his script. Can you post the text, instead of picture please
Sorry, I forgot Grog's script uses boxbranding, which PLI do not have.
Have you tried a differrnt USB stick? If you have a microSd card, have you tried removing it when flashing by USB?
Last edited by abu baniaz; 23-09-20 at 19:30.
I read Grogs method and it states usee SSH,
when I usee SSH via putty this is what I'm getting.
2.png
Flashing guide.....
Flashing the Receiver.
1) Power off the receiver
2) Ensure no other USB devices are plugged into the receiver
3) Insert the USB stick containing the image, rear usb port if possible.
4) Power the receiver on.
5) Immediately after powering on PRESS AND HOLD the front power button behind the FRONT FLAP until "flashing" appears on front display.
6) If successful the receiver will reboot it self after the flashing process has completed.
7) Remove USB stick that contains the images files.
On Willow's site, there is a tool to format USB stick. Make sure you do not format the USB stick with our backup
Code:https://willobuild.com/utilities.php
The Image which I downloaded contains a folder called rootfs.tar.bz2 is this to be extracted aswell?
Managed to fix this, it was the recovery file emmc which needed to install, flashed via usb and all back.
Thank you Abu baniaz helping me out.
Never again using the multiboot image selector.
Goodnight.
bmitie (25-09-20)
Multiboot Image Selector will be fine now.