Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
dsayers (01-12-19)
Thank you for creating this plugin mate
I have a nordvpn subscription and am trying to get this to work.
I created the VPN folder in HDD (/hdd/vpn), and ran commands 2,3 & 4 from the OP but when I enter commend 5 I get the following:
"cp: can't stat '/temp/password.conf': no such file or directory"
Where am I going wrong?
Also I dont know where I enter my nord vpn details
Can someone point me in the right direction?
Thanks guys
Edit: nordvpn gives me the choice to download either UDP or TCP config files, which should I choose?conf.png
Last edited by Slammed Mind; 01-12-19 at 13:27.
What countries have you tried and have you ran a network test when running vpn?
To change dns
Turn off VPN.
In network menu run network wizard turn dhpc to no and set
Nameserver 1: 8.8.8.8
Nameserver 2: 8.8.4.4
You may be asked to confirm just re enter Nameservers.
Turn on VPN then run network test.
Last edited by dsayers; 01-12-19 at 18:23.
You create password.conf in tmp folder with your username and password or for Nord just run the openvpn script http://e2openvpn.com/OpenVPN_Generator/
For Nord vpn I use UDP files for the script
Last edited by dsayers; 01-12-19 at 18:23.
Ex-TM6900 (19-02-20)
My VPN provider is ExpressVPN. I can confirm that it works on OPENVPN. I didn't use the script here provided. I just added my ExpressVPN username and password to the password file then I manually copied the 2 files over. I also have the IPChecker Plugin installed which checks my external IP
Just wanted to let you guys know
I didn't need to change DNS either
Last edited by eamo; 12-02-20 at 11:49.
Just wanted to say a big thank you to Dsayers for all his hard work and his time in making a VPN that works with our boxes.
I have a Duo 2 and used his script to generate and install the VPN which is working great with PureVPN.
Many thanks again sir - for all your hard work !!
Andy_Hazza (19-02-20),dsayers (19-02-20)
Test OpenVPN script generator
Hi im looking for users to test a new version of the script.
Setup is similar but this version will install VPN Manager with an option to edit username and password via the plugin in case it was incorrectly put on the generator.
First open Putty, and in the HostName (or IP address) box enter the enigma2 boxes IP address, and then click the Telnet radio button and click open
Main screen.jpg
And then log in using the word, root
telnet.png
Users can visit
https://e2openvpn.com/test_gen/
Add there username and password this will now generate a script.
Copy and paste the script in putty and hit enter you should now have the option for what VPN you want to use:
1) Nord VPN
2) IP Vanish
3) Digibit
4) PureVPN
5) PIA VPN
6) Windscrape
7) SurfShark
8) TorGuard
9) Ivacy
10) Quite
Choose your option and hit Enter this should then download the configs and once finished it will say OpenVPN Configs downloaded Please Start OpenVPN.
You will be asked to enter your choice again but you can ignore this.
Reboot box and goto plugins, VPN Manager and choose a country.
VPN_Manager.jpg
If you receive auth errors you can press menu and check the location is correct it should be /hdd/vpn_name. You can also check username and password is correct and edit if needed.
For manual setup VPN Manager by murxer
Install ipk, Save all configs to one folder no need to edit them then Open vpn manager and press menu change All config in one folder to yes
Save directory config set to the location of your config files
Then you can add username and password.
dmboot (04-07-20)
for some reason it is not updating my username. I have tried to change it on the box and pressed every button on the remote and it will not delete the UUUU
VPN manager plugin
This VPN manager makes things a bit easier as no need to mess around editing files
You can download the plugin from here
https://github.com/davesayers2014/Op..._1.1.3_all.ipk
Install it.
Now download the config files from your provider and send all config files to HDD/vpn create the vpn folder if needed.
Now open VPN manager then menu and set the following settings:
All config in one folder: yes
Save directory is default hdd/vpn
Add username and password then exit
You should be able to choose a country.
For long username and password in terminal openwebife or putty you can use this command just change USERNAME and PASSWORD with your details
Code:cd . init 4 sleep 3 sed -i '$i config.vpnmanager.username=USERNAME' /etc/enigma2/settings sed -i '$i config.vpnmanager.password=PASSWORD
Last edited by dsayers; 21-09-20 at 14:30.
Andy_Hazza (21-09-20),CRUMBLIN (23-09-20),khan888 (27-09-20)
hi dsayers,
Late to the party with this, im trying to use PIA and it dosent seem to be downloading the required location files, I can download them manually and add them to HDD/PIA_VPN2
should the script automatically download ALL locations from the PIA website?
Also im using my main site login details, should I be using "PPTP/L2TP/SOCKS Username and Password"
sorry if these have been covered, I have tried to look the thread for relevant info.
Works ok with PIA here using the script
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)