Hi, my Octagon SF8008 was working ok but after turning it off to re-locate it, it will not re-start and just shows “boot” on the front panel. I have tried USB Flashing with the latest vix but it does not respond.
Hi, my Octagon SF8008 was working ok but after turning it off to re-locate it, it will not re-start and just shows “boot” on the front panel. I have tried USB Flashing with the latest vix but it does not respond.
Try different usb flash drives. Make sure you are formatting the drive to Fat32. Also make sure no other usb devices are attached to your receiver.
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
Try disconnecting all cabling barring Hdmi and power.
Welcome to Satellite Support Forum .: Home of OpenViX Team:.!
World-of-Satellite enthusiasts Satellite, IPTV, Technology, Audio visual Forum.
Any information provided on this site is not guaranteed in any way. Some articles may discuss topics that are illegal, so this information is provided for educational purposes only, your use of the content, downloads and files, or any part thereof, is made solely at your own risk and responsibility. Viewing Pay TV without a valid subscription is illegal. !! World-of-Satellite.com cannot be held responsible for the content of any information stored or posted on this forum.