Gigablue uhd quad 4k no blindscan. Latest VIX image but it sits there nothing happens even after an hour. Have to switch off power and restart.
Gigablue uhd quad 4k no blindscan. Latest VIX image but it sits there nothing happens even after an hour. Have to switch off power and restart.
Do you have a blindscan capable PnP tuner added?
Just the tuners that cam with it. Lists Tuners A to H NIM 45208 FBC
I seem to think no longer blindscan on FBC tuners need S2X tuner - but also seen elsewhere they are waiting new firmware from Giga for blindscan
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................
Vu+ Uno4KSE, Dreambox dm900
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
Odd as it used to work until I did a new flash of the latest Vix image.
Loaded openvix-5.2.045 which I found in my downloads. Blindscan works fine now.
What Sats are you using blindscan on??
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................
Vu+ Uno4KSE, Dreambox dm900
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
No blind scan on my Gigablue so will have to buy another tuner or will it be fixed
We are of the understanding that the onboard tuners do not support blind scan.Please advise if incorrect.
However, there was a commit to enable function in more GB devices.
Last edited by twol; 16-12-19 at 13:19.
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................
Vu+ Uno4KSE, Dreambox dm900
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
OP started the same theme last week....
https://www.world-of-satellite.com/s...k-no-blindscan
abu baniaz (17-12-19)
Gigablue UHD Quad 4K. Unable to blind scan on any sats with the later images. Used to be able so I flashed openvix-5.1.033 with no restore and only selected one satellite in the tuner setup 23.5 as the dish was already on that satellite. Did a blind scan for Channels FTA, filtering out ypto 3 degrees. 112 found.
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................
Vu+ Uno4KSE, Dreambox dm900
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
Only the tuners that came with it new. DVB/S2 NIM 45208 FBC DVB/S2
Although I agree that initially the FBC tuner worked for me, at some stage it caused a crash in the plugin - at this time there was a view that FBC tuners (Vu+, Gigablue) did not support blind scan and they are blocked in the Blindscan plugin.
However, I also have the S2x tuner and that should (in my view) work, but doesn't - will see if there is anything obvious.
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................
Vu+ Uno4KSE, Dreambox dm900
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
Emulated (16-12-19)