Is Multiboot also going to be available for Zegemma H9.2S, please let us know.
Regards.
Tunder
Is Multiboot also going to be available for Zegemma H9.2S, please let us know.
Regards.
Tunder
There is a move to sd card function.
https://www.world-of-satellite.com/s...emma+move+card
Last edited by abu baniaz; 27-05-19 at 00:37.
I have extended the memory to 8G so I have plenty, it would be great if mulib00t is added to the H9.2s receivers.
Its kind of possible using the SDcard - but only with a GPT partition structure.
Unfortunately although I have tested with a updated version of ofgwrite (the tool that flashes the partitions) and it works, the limitation is that the code would require all similar receivers to support GPT and the SF8008 receiver bootloader doesn‘t.
So it may happen but don‘t expect it soon!
At the moment, if the SD card is in use then ImageManager will flash the SDcard with a new image, but there are limitations in no kernel change
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
Probably ......but I don‘t like the plugin, prefer to do it directly in ViX!
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
unfortunalety the openmultiboot in not under the VIX image plugins, therefore we can't try it and se how it works.
Under extensions in download plugin
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
There is no openmultiboot under extensions in download plugin on the VIX image on my Zgemma H9.2S, I seen it on the OpenATV and the OpenDroit images.
What menus are you checking?
I am doing:
Menu > Plugins > Green (download) > Extensions > openmultiboot
If it is already installed, you will be able to see it in teh opposite method
Menu > Plugins > Red (Remove) > Extensions > openmultiboot
This is on a different receiver. If you can confirm menus you are using, then we can look further into it.
Hello Abu
Here are some pictures:
Regards.
Tunder
He is correct its not there in downloads for H9, probably because there is no Machine Feature specified for OMB in the h9.conf.
Whether it would work with the HiSilicon architecture is open to question.
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
Hello All
Thanks for your comments, Is there any way this plugin can be install as a opkg package or any other way so we can try it out and see if it works, please let me know, I'll give it shot.
Regards.
Tunder
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K