Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Results 1 to 9 of 9

Thread: Vu+ UNO 4K SE Weak Signal

  1. #1

    Title
    Junior Member
    Join Date
    May 2015
    Posts
    12
    Thanks
    3
    Thanked 0 Times in 0 Posts

    Vu+ UNO 4K SE Weak Signal

    Stb: Vu+ UNO 4K SE
    Firmware: Openvix 5.2.039
    LnB: Inverto Unicable I / II LNB 1/24 - IDLU-24UL40-UNMOO-OPP
    Setup: Tuner A (Connected to tuner B); Tuner B (is where the coaxial cable is connected).
    Satellite: Hispasat 30ºW

    On my Vu+ UNO 4K SE I cannot get the signal better than 80% 80%.

    If I connect my VU+ ZERO 4K to the same coaxial cable end, I immediately get 100% 98%.

    What may be the problem? Faulty tuner on my UNO 4K SE?

  2. #2

    Title
    Senior Member
    Join Date
    Jul 2011
    Posts
    189
    Thanks
    84
    Thanked 66 Times in 46 Posts
    with an example you will understand it better.
    I have hybrid sistem receiver android/e2-openvix with UNICABLE .... both systems make me very remarkable signal difference. (e2 openvix signal 58% and Android 98%) not because of this I have problems with openvix ...

    you have two receivers same manufacturer but different HW which does not scare of these values ... the explanation is how the drivers behave with respect to the HW.

    When is it a problem? When you have pixellations in channels or lose total signal in channels or similar situations.

  3. The Following User Says Thank You to norhap For This Useful Post:

    jorgeavlobo (24-04-19)

  4. #3

    Title
    Junior Member
    Join Date
    May 2015
    Posts
    12
    Thanks
    3
    Thanked 0 Times in 0 Posts
    It is a big problem for me actually, I can only view 10% of the channels with the Vu+ UNO 4K SE, if I plug the Vu+ ZERO 4K I can see all the channels.

  5. #4

    Title
    Senior Member
    Join Date
    Jul 2011
    Posts
    189
    Thanks
    84
    Thanked 66 Times in 46 Posts
    do a complete search channels of your satellite with Vu + UNO 4k ...
    then go to the bouquet (last scanned) and zap those channels ... tell me if I improve.

  6. The Following User Says Thank You to norhap For This Useful Post:

    jorgeavlobo (24-04-19)

  7. #5

    Title
    Junior Member
    Join Date
    May 2015
    Posts
    12
    Thanks
    3
    Thanked 0 Times in 0 Posts
    A complete search improves it since it only finds a few channels and all of them work
    I need all the other ones.

  8. #6

    Title
    Junior Member
    Join Date
    May 2015
    Posts
    12
    Thanks
    3
    Thanked 0 Times in 0 Posts
    I just realized something, my Vu+ UNO 4K SE has the tuner: FBC DVB-S2
    My Vu+ ZERO 4K has the tuner: FBC DVB-S2X

    It makes me conclude that the image Openvix 5.2.039 does not have the proper drivers for the FBC DVB-S2 on the Vu+ UNO 4K SE.

    Is this thought incorrect?

  9. #7
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    8,618
    Thanks
    1,009
    Thanked 2,964 Times in 2,305 Posts
    The drivers are fine, I am guessing its your config for the FBC tuner - can you post a pic of your tuner setup,
    Also I would setup the cable on tuner A and then define tuners C -> H as connected to A in the FBC tuner setup.
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
    ------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
    .......................
    Vu+ Uno4KSE, Dreambox dm900
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
    Zgemma H9 C/S into Giga4K

  10. The Following User Says Thank You to twol For This Useful Post:

    jorgeavlobo (24-04-19)

  11. #8

    Title
    Junior Member
    Join Date
    May 2015
    Posts
    12
    Thanks
    3
    Thanked 0 Times in 0 Posts
    Thank you for the post.

    I have changed the coaxial cable to tuner A and have configured accordingly.

    Tuner List.jpg

    Tuner A.jpg

    Tuner B.jpg

    Tuner C.jpg

    Signal Finder.jpg

    Coaxial Cable.jpg

  12. #9

    Title
    Senior Member
    Join Date
    Jul 2011
    Posts
    189
    Thanks
    84
    Thanked 66 Times in 46 Posts
    Quote Originally Posted by jorgeavlobo View Post
    A complete search improves it since it only finds a few channels and all of them work
    I need all the other ones.
    When you did full search, did you have channel signal or was it at that moment of searching on a channel without signal?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.