Hi,i have zgemma h7c and openvix crashes when I want to boot from multiboot on another image like openPli...
I hope you can solve this anomaly.
Thank you in advance.
Hi,i have zgemma h7c and openvix crashes when I want to boot from multiboot on another image like openPli...
I hope you can solve this anomaly.
Thank you in advance.
Which image is in slot 1?
Do you have a crash log please?
I openpli 7 in the first slot .. and I do not have a crash log.
when i'm openvix and i want to boot in openpli gives crash blue screen 10 seconds and boot on the same picture ie openvix.
Due to this situation I have to take it from scratch and install again through usb openpli 7...excuse me for my bad English
Last edited by giku; 13-04-19 at 12:04.
Please get a crashlog.
Is there a problem if Vix is in slot 1?
vix has been mounted in slot 2, has not been installed at slot 1 at all.
due to this crash, I have not installed openvix anymore because I lose the other images like opendroid, openpli and openatv..!!!
Last edited by giku; 13-04-19 at 12:23.
Can you also give the OpenPli image version/date and also the OpenViX version
A little information is helpful!!
How do you switch between the images? What do you see on the screen?
it is not possible to lose the other images!! ..... they will still be there in their image slots.
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................
Vu+ Uno4KSE, Dreambox dm900
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
the first slot I have 'openpli-7.0-release-h7-20190408_multiboot'
the second slot I had 'openvix-5.2.035.release-zgemmah7_usb'
the rest I explained in previous posts why I did not install openvix!
OK so how you change between images and can we have a crash log or debug log from OPenViX when you try to reboot to another image???
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................
Vu+ Uno4KSE, Dreambox dm900
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
I did not save the crash log to openvix...
now I have not installed openvix in h7c.
I've got OpenViX in slot 1, 3 and 4, OpenPli in slot 2. No issues here.
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
twol (13-04-19)
do you boot from the vix in the pli ?
and which vix version do you have in Slot 1 ?
Not going to help - its 3 months since this code changed (and the core code hasn‘t changed in a long while).....in fact both OpenPli and OpenViX code are similar in this area.
it would help to have either debug or crash log.
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................
Vu+ Uno4KSE, Dreambox dm900
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
Sicilian (16-04-19)