I don't have the receiver. There were a few posts about Sundtek tuner, I've moved to separate thread.
I don't have the receiver. There were a few posts about Sundtek tuner, I've moved to separate thread.
i dont see this kind of problem in kodi, can test
EGGMANCAN (19-01-19)
I'm not sure if it's the same issue as I was having issues with sat tuner but is pid filter off? https://www.world-of-satellite.com/s...l=1#post458988
Sorry just realised yours is opticombo tuner so I doubt that's the issue.
Last edited by dsayers; 19-01-19 at 18:30.
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
the LCD front panel settings, the ability to alter the audio settings and the level that the volume control key increases the audio. I do like how OpenViX are regularly releasing driver updates though.
Can anybody tell me what the main differences are between OpenATV and OpenViX?
Last edited by EGGMANCAN; 19-01-19 at 23:40.
Interested in your specifics - reason ATV wwas developed from ViX I think starting in 2014.
LCD front panel settings - these I thought should be the same (same software for this lcd) - so what is different?.
the ability to alter the audio settings - what exactly do you mean? is this the actual settings for say AC3, DTS, AAC or what? (ATV uses a common list for each audio type - ViX gets it from the receiver - so its accurate)
Audio volume - this should be same, but will vary on audio type selected.
Really interested in what you are seeing/hearing! QAlso is this direct to TV or via amp?
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
EGGMANCAN (21-01-19)
Just for information I have just done a fresh install of ViX 5.2.024 on a Zgemma H7 and added the Sundtek Control Center and Opticombo drivers from the ViX feeds and both usb tuners work as expected.
The Sundtek tuner is a sat tuner and the Opticombo is a cable/terrestrial tuner.
abu baniaz (20-01-19),Huevos (20-01-19)
"ATV was developed from ViX"? I did not know that.
For the LCD display see this post: https://www.world-of-satellite.com/showthread.php?60512-Channel-number-on-the-front-display-Openvix
It's not a big deal, the time is probably the best thing to have showing on the front display.
I also didn't know "(ATV uses a common list for each audio type - ViX gets it from the receiver - so its accurate)" .
What I mean is on OpenATV you can change how much the volume increases or decreases when you press the volume buttons.
So from 0% to 100% volume can be 5x up/down volume button clicks or 50x up/down volume button clicks.
Last edited by EGGMANCAN; 21-01-19 at 12:31.
twol (21-01-19)
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
Please keep posts relevant to the thread on topic.
Aktuelle Treiber mit DVB-S2X Tuner Info.
Current Driver with DVB-S2X Tuner Info.
root@sf8008:~# cat /proc/bus/nim_sockets
NIM Socket 0:
Type: DVB-S2X
Name: Si2166D
Has_Outputs: no
Frontend_Device: 0
I2C_Device: 0
NIM Socket 1:
Type: DVB-T2
Name: ATBM7821 DVB-T2/C
Has_Outputs: no
Frontend_Device: 1
I2C_Device: 1
Ch. Scan (Manually, Auto, Blindscan) issue improved after add T2-MI driver.
Programmsuchlauf (Manuell, Auto, Blindscan) verbessert nach T2-MI Treiber.
hi-dvb.ko und vtunerc.ko per ftp nach /lib/modules/4.4.35/extra kopieren und box neustarten.
copy via ftp files hi-dvb.ko und vtunerc.ko to /lib/modules/4.4.35/extra and reboot box.
Hinweis: im morgen image ist noch update für Blindscan Plugin ethalten
Notice: in tomorrow image is additional update for Blindscan Plugin include.
[Blindscan] Add T2MI default pid (for images that are T2MI savvy).
jenseneverest (23-02-19),ronand (22-02-19),vmax (22-02-19)