Amiko A5 - Enigma2 images

[honlino]

I tried cccam because oscam wasn't working either.

Better saying, i can listen do the sound 5s then it cuts for 1s and returns, no image ever though

[chocobo]

The 4k channels also do not work for me. the truth is that this decoder in enigma2 does not work. it has a lot of bugs. Support does not exist. I tried to contact the amiko's support, but I did not get an answer.
In android the translations of the menus are bad, if I try to disable the cec function, it continues to be active.
In enigma2, 4k channels do not work, kodi does not work, ftp does not work, with the decoder in deep stanby the led stays blue and does not turn red.
In both cases, enigma2 or android the support is non-existent.
If I had known, I would not have bought it. the advice I can give, do not buy the amiko decoder

[honlino]

The 4k channels also do not work for me. the truth is that this decoder in enigma2 does not work. it has a lot of bugs. Support does not exist. I tried to contact the amiko's support, but I did not get an answer.
In android the translations of the menus are bad, if I try to disable the cec function, it continues to be active.
In enigma2, 4k channels do not work, kodi does not work, ftp does not work, with the decoder in deep stanby the led stays blue and does not turn red.
In both cases, enigma2 or android the support is non-existent.
If I had known, I would not have bought it. the advice I can give, do not buy the amiko decoder

I have everything working on android, without any issues, but enigma is way faster, that's why i want to have 4k channels working on it.

There's a workaround to put ftp working on enigma 2, edit the file /etc/init.d/vsftpd

between the line
test -f $DAEMON || exit 0

and

set -e

write this:
chown root /etc/vsftpd.conf

in the end it looks like this:
test -f $DAEMON || exit 0
chown root /etc/vsftpd.conf
set -e

kodi in enigma2 are always sketchy, that's why i want android working to use kodi

[mihaip]

@chocobo --- did you tryed PurE2 Enigma2 ? did you tryed OpenSPA ?
did you tryed OpenATV unofficial image ? i think NO ! you just repeating
the same melody ... if you don't like it , send it back !!!
You want personal support ... find it ! there are at least two support forums ...

[chocobo]

I have everything working on android, without any issues, but enigma is way faster, that's why i want to have 4k channels working on it.

There's a workaround to put ftp working on enigma 2, edit the file /etc/init.d/vsftpd

between the line
test -f $DAEMON || exit 0

and

set -e

write this:
chown root /etc/vsftpd.conf

in the end it looks like this:
test -f $DAEMON || exit 0
chown root /etc/vsftpd.conf
set -e

kodi in enigma2 are always sketchy, that's why i want android working to use kodi

I already tried this solution, it works. Initially it works and then stops working. Maybe when it start in android and then again in enigma2.
Please can you try the CEC function on android? I deactivate it in the menu, but it continues to work.

@chocobo --- did you tryed PurE2 Enigma2 ? did you tryed OpenSPA ?
did you tryed OpenATV unofficial image ? i think NO ! you just repeating
the same melody ... if you don't like it , send it back !!!
You want personal support ... find it ! there are at least two support forums ...

the unofficial openatv image that you have recommended and that you gave for sure KODI working, does not work!
Pure2 I tried it, but it is not very different from the original image.
All alternative images have basic openatv. Change the graphics and it's the least important thing.
Support forum? What are they? It's always you that you always give everything up and running but then nothing ever really works.
Do you work for amiko? most of the things you say are not real.
I'm sorry to say it, but you, mihaip, you're not objective.

[mihaip]

Well ! I don't work for Amiko ! I was never payed by them !!!
Kodi is working in both PurE2 and OpenATV unnoficial ...
at least for some hundreds of users I know ! 4K channels
are working .... you wrote anout NASA TV UHD ... I'm looking
at it ! works fine ... Well , I tell you again ... you don't like it !
send it back !!! Acusing me as lying is a disrespect !!! so I
end this here !

[chocobo]

if I could I would have done it already. you can say that you do not work for amiko, but your behaviors say something else
I'm not the only one who says it.
you are the only one who says that everything works.
Needless to talk to a presumptuous person.

[hispanico66]

There's a workaround to put ftp working on enigma 2, edit the file /etc/init.d/vsftpd

between the line
test -f $DAEMON || exit 0

and

set -e

write this:
chown root /etc/vsftpd.conf

in the end it looks like this:
test -f $DAEMON || exit 0
chown root /etc/vsftpd.conf
set -e

Ths for the tip but I ask you: "How can I edit the vsftpd file if FTP doesn't work?"

[mihaip]

No need to edit it ! is enough to setup the owner as shown !!!

[sergiri]

Ths for the tip but I ask you: "How can I edit the vsftpd file if FTP doesn't work?"

Try with sftp connection, it works fine and is safer.

[CATINIELLO]

Hi, please, i need to have a working image of OPENATV or other image Enigma 2 working on my amiko a5 combo for making these simple things:
- search and storage digital terrestrial sd and hd channels;
- recording these one on my usb pen linked to decoder;
- unlock pay tv digital terrestrial channels;
- entering nagravision smart card
Let me know how version u want provide to me, please

P.S.: this decoder supports or not wifi dual band, such as 5 ghz with 2.4 ghz or only this last one?

[mihaip]

- use PurE2 image
- dvb-t2 is working fine
- pay-tv channels can be unlocked by Oscam
- Oscam supports N2 cards

[kataiba]

Hi everyone.

I've got this box Amiko-A5-T2-C-4K-extra-big-6963.jpg

I've tried different Enigma 2 and i get stuck at boot screen.

I've put the Android image in 1080p before rebooting, i dont know what else to try/do

Thank you