I also get that buffer when changing channel and also wired connections like its trying to catch up+ the odd freeze when my switch stops blinking.
I also get that buffer when changing channel and also wired connections like its trying to catch up+ the odd freeze when my switch stops blinking.
I've been using 2 VU+ zero's as clients to my DuoČ with twin sat and twin cable tuners for quite a while. Where everything runs fine bouquets and viewing recordings on clients, my only problem is recording on client box.
I did set up remote timers but some failed?? . I have seen lots of posts about this but no answers. I've tried allsorts.
Is there a way of recording on client box (it says recording when button pressed but end up with no recording)
Destination of where to record maybe?
Ahhhh of course
NO tried different destinations. surely someone knows a yes or no, on recording in client mode
11) what image are you running?
2) where are you recording to and is it defined as HDD
Just pressed record and it works fine for me. (ET7500 running in client mode)
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................
Vu+ Uno4KSE, Dreambox dm900
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
Tried that on my tm nano which has no hdd or usb and could not record elsewhere.I do remember hearing of setting up external points to record to.
@twol i presume you have a hdd on box to record to?
i have 2 zero's running latest vix my server box is a DuoČ also running latest vix. One zero has 32g sandisk stick mounted as hdd and the other has powered external hdd, recording to media/hdd/movie/. when i hit record button it goes through the motions but when
you go to recordings the file is zero. (post 135 on this thread the same).
Everything is hard wired to Asus RT-AC5300 router .I have also tried using my SoloČ as as sever its the same.
When I have been testing the recording nobody has been using other box so I dont think its tuner issue
I have put one box back to use channel stream converter to get channels from DuoČ and a coax to 28.2 for freesat it records fine from sat.I've had DuoČ since they were released and when zero's came out i've used them on Remote channel, then client mode when that was released,I've Just started trying to record again as I'm looking at the Duo 4k
Last edited by v8rick; 16-12-18 at 09:39. Reason: forgot recording destination
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................
Vu+ Uno4KSE, Dreambox dm900
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
cactikid (16-12-18)
I had a few 0 timer recordings even on sat tuners,is the hdd in use an externally powered one and presume mounted correctly.When setting timers recheck start/stop times in case its wrong.Was the main box in use stopping the slave from working and getting no free tuner and if so would 0 with no data be correct?
@v8rick - turn on debug logs and post here....
Also (because I have never bought a Vu+), I have no idea if you need the Pau plugin or not for the OE-A images (you do for OpenPli) as the Vu+ Zero is sold as a zapper (not for recording) ...
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................
Vu+ Uno4KSE, Dreambox dm900
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
Thanks for your time, I think I remember reading about Pau being in already but I'll check again Thanks again
I think your correct. I put my soloČ into client mode it records fine I don't know why i never thought of trying it before.
I wish i had tried this when i only had one Zero,Now you can pick soloČ for the same money.
At least i've found out by mistake that Zero will record off extreme plugin.
There again if i could predict the future i wouldn't have my humax 5400. topfield 5500,Technomate, Spider and other door stops like most peeps in this hobby LOL
If I have IPTV set up on my Server box via Xstream, is there any way I can watch the supplied channels on my Client receiver?
Thanks for any help.