Do I have to setup the internal drive before I can record and playback recordings.
Do I have to setup the internal drive before I can record and playback recordings.
Yep
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
What do you mean by "setup"?
How many storage devices do you have connected?
What filesystem does the HDD use? fat32, exfat, NTFS, ext?
Hi
How do I format the HDD?
There's no menu option for it.
If connected will show up in the ViX menu under Storage. If this doesn’t show, the HDD isn’t properly connected.
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
DC33 (01-12-18)
Andy, thanks for that, gave me a starting point.
Wasn't showing up - external one was.
Tutns out the SATA connection on mobo doesn't work. Tried connecting 4 different hdd.
Swapped connector with esata one, works. Not using the esata anyway, so no loss there.
Just need to transfer from external to internal now.
Sent from my TA-1012 using Tapatalk
Hi Andy, Sorry for jumping in here. I installed a new HD (500GB) and Im still finding my way around the Tiviar box. I too am having trouble formatting the new HD, where is the Vix menu on the box?
Also is there a user manual that I can download?
Last edited by MeMyself; 09-02-19 at 01:07.
Aup. Press Menu > Setup > Storage > Initialise and select your HDD and press Ok and the Green button to Initialise it (Format to Ext4). Say Yes on next warning about wiping data clean. After that has been successful you need to setup a Mount point for the HDD. To do that press Blue button > ViX Setup Mount or Mount Setup and select your HDD and press Green to Setup Mount. Say Yes on next prompt and when successful say Yes to Restart your receiver.
You should now have a n Ext4 mounted HDD.
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
HI Andy, Thank you for your reply. I should have mentioned that I'm running Open 6.1. I have tried what you replied with but I cant see a Storage option after pressing Setup, What I am seeing is Video, Audio, Recordings & Timeshift, Usage & GUI, EPG, Service Searching, Common Interface, Parental Control, Software Management.
OpenATV those options are in blue button menu. I can't remember the exact options but you should have device setup.
Just a side not OpenATV 6.1 feeds are dead so you may have issues installing plugins maybe flash an updated image.
Last edited by dsayers; 09-02-19 at 10:37.
The storage option/menu will only be displayed if a storage device is detected.
I managed to get the HDD mounted and untilised. Im trying to install the Picons now, can I use this video guide to transfer the Picons? http://www.openvix.co.uk/index.php/g.../video-guides/
Last edited by MeMyself; 09-02-19 at 23:25.
[QUOTE=Andy_Hazza;481607]Aup. Press Menu > Setup > Storage > Initialise and select your HDD and press Ok and the Green button to Initialise it (Format to Ext4). Say Yes on next warning about wiping data clean. After that has been successful you need to setup a Mount point for the HDD. To do that press Blue button > ViX Setup Mount or Mount Setup and select your HDD and press Green to Setup Mount. Say Yes on next prompt and when successful say Yes to Restart your receiver.
You should now have a n Ext4 mounted HDD.
Thank you Andy this is so helpful on my box it doesn't have press green button as an option. But when I clicked it formatted.
Thanks again
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)