Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
ignores the pause button, nothing happens, also tried play just incase.
I would maybe say its box/remote currently, as happens on these on SF8008 Openatv/Vix/OpenEight/PurE2, but pause works fine on Mutant HD51 in the 4 I have in multiboot.
I did see somewhere about the sf8008 and these buttons in general, but cannot remember where I see it, maybe OpenATV forum.
Tanks to Octagon Support (very fast) the problem of aspect ratio is now fixed.
Octagon-Germany (14-11-18)
thanks for test and report
Guys thank you for the support. I managed to delete the kodi folder and now the full screen problem has been fixed.
Now I have the very last issue. All the videos are having some kind of stuttering. I think i have tried all the possible options in playback and video settings.
Please check the video below as example of what I mean. It's clearly visible if you start watching from 1.10 till the end.
https://drive.google.com/file/d/1xED...w?usp=drivesdk
Any idea? If this will be fixed I can finally use it as media center!
Could be the codec .. what is it? Cannot access the file ..google gets in the way.
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
today Image 100% snr dB issue fixed.
Andy_Hazza (15-11-18)
Correct, its no longer 100%! BUT it's now between 81/83% for ALL services.
In my case I have a marginal 28.2E signal, which depending on whether its a Pan European beam or UK spot beam gives me a broad spectrum of Signal (SNR) values between approx (6.8 dB -> 16.8dB and ALL my other receivers show similar readings although obviously the actual dB will be different across receivers)
With both todays OpenATV and OpenViX images, whatever service you are watching it reads 81 -> 83% 13.3 -> 13.6dB and the only time it is not like this is when there is no signal i.e. 0
This is not a skin issue, but driver related.
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
el bandido (15-11-18)
Thanks to all for the quick fix with the Kodi screen issue, only got chance to test it briefly now and all seems good.
thumbs up for openvix!
Now I have the very last issue. All the videos are having some kind of stuttering. I think i have tried all the possible options in playback and video settings.
cant see your video, how bad is the flickering or is it barely noticeable? I have the hard drive plugged into the modem/router wired connection and seems smooth enough, maybe not full 100% smooth as it should be at times but its watchable, I need to sit down a watch some movies in full to check it properly
Hello to everyone Good morning!!
new drivers for sf8008!!!
https://github.com/oe-alliance/oe-al...s/meta-octagon
Someone please help to translate this...
I dont know for what are for thease drivers!!
Thank you!!!!
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
mariosbbs (20-11-18)
Just to let you know, that Octagon have fixed the issue regarding "No Pause within VOD on Stalker-QT on the SF8008 that I mentioned to them, they posted on there forum and OpenATV saying will be in new images soon, but here is a file.
Unzip
Replace the stalker.qmap in usr/share/stalker. (maybe backup that file prior)
Tested so far on OpenVix, OpenATV, PurE2, works perfect.
Always good when a team listen to things and implement fixes pretty quick.
Last edited by danny121pt; 25-11-18 at 23:27.
john doe (26-11-18),ngc.ie (29-11-18),Octagon-Germany (26-11-18),Sicilian (26-11-18)