Thank you.
Thank you.
So, everything works clean for me.
So can you 1st reflash latest from scratch - if you want to keep bouquets etc then copy them over from /etc/enigma2 (bouquets, userbouquets, lamedb) or use something like Echannelizer.
Turn on debug logs.
unzip attachment and copy files as follows.
multiboot.py ---> usr/lib/enigma2/python/screens
ImageManager.py ---> usr/lib/enigma2/python/Plugins/VIX
Reboot (preferably use a putty session to freeze before the copy (init 4) and after to reboot (init 6)
If it doesn't work post the debug logs.
There is now (untested) code in there to check for the non-STARTUP files (although the STARTUP files should be still there)
MBDebug.zip
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
Thank you. I will give it a go.
Unfortunately, the box now does not fully startup. It stops with the openvix display and a full row of dots on the front panel.
I was not very sure whether it should be multiboot.py or Multiboot.py so I have both in ..screens.
I can telnet and ftp to the box OK.
I tried renaming the files and then deleting them but the box still won't fully boot!
Is there something else I could do or check?
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
Any joy? I could try flashing openatv or openpli from a USB stick?
Last edited by twol; 08-11-18 at 17:50.
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
Here is the file from the telnet session after trying to run enigma2.
Last edited by twol; 08-11-18 at 18:03.
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
No, I did see a problem with Screens at the top
Flash 011 build!
Its the very latest and my changes will work if needed.
Last edited by twol; 08-11-18 at 18:07.
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
Will flash 011
twol (08-11-18)
I flashed version 11 and did restore my settings. I found that the /boot directory was empty so I added the 4 files from your earlier post and the box has created a 5th file.
However although I have managed to add openatv to slot 2 I can't boot it nor can I get VIX to run in mode 12
What can I try next?
turn on debug
Stop the system with putty (init 4)
Rename the 4 STARTUP_X files to xSTARTUP_x
Go to the Screens directory ... rename Multiboot.pyo to xMultiboot.pyo
Copy my Multiboot.py to the Screens directory
Reboot (init 6)
Try to reboot to slot 2
Post the debug log(s)
The added code should deal with no STARTUP_2 by creating a new STARTUP, so there should be no way it cannot boot the new image in slot 2, so lets see what happens.
This is really weird ... but....
Last edited by twol; 08-11-18 at 19:54.
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
Thank you. SWMBO is watching the TV at the moment - I will have to try later!