Sorry, my post should have read Menu/Setup/Tuner config
I flashed the image from a USB drive image I downloaded. I wasn't prompted to restore settings. There is no backup in Backup manager
Both tuners are configured the same, and the A Tuner works fine. The B Tuner is disabled at present, and when I enable it I have the same settings as on the A Tuner.
I cannot run ABM because it is not in Tuner config.
I have downloaded putty to my win10 pc but not yet deployed because I am concerned about my ability to use it
ABM will only show if your tuners are configured. please post a screenshot of your tuner configuration.
Be courageous.
If the restore wizard can't find a settings backup, you won't be prompted to do a settings restore.
If you have one somewhere else, you can copy it to the default settings backup location (press menu in backup manager to see where it goes), and restore it from there.
There'll be no need to reflash.
Last edited by ccs; 11-10-18 at 19:45.
Read post 20 again. Until you answer this one you will only be going around in circles.
Edit: ccs beat me to it.
Zgemma H7S running OpenVIX 6.2, Darkmotor, Triax TD110 dish, Inverto Black Ultra dual lnb
LG 50UM7450 4K TV, Pioneer VSX-534 Atmos AVR , Panasonic UB820 region free 4K Bluray & a PS4.
In your Tuner A & Tuner B Configuration setup sections, Net ID is best being left at 00000. Then set your Net ID in ABM, in the Providers section.
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
Are the dvb-t tuners unconfigured? I don't think that would make a difference though.
That is tuner A, what about tuner B screenshot? I know you said it's the same.
Last edited by abu baniaz; 12-10-18 at 13:52.
Can you enable debug logs, restart, go back into tuner configuration menu, grab debug log and attach here