Unicable II, Inverto IDLU-32UL40-UNB00-0PP, FBC tuners

[shortheath]

I thought this might help you! I have just managed to record channels simultaneously.
Here is my setup. I am running OpenVix 5.1 Build 33 on a Vu+ Solo 4K dual FBC tuner

Unicable 2 LNB attached to Tuner A


Tuner A
Configuration mode: Advanced
Satellite: 28.2E
LNB: LNB 1
Priority: Auto
Type of LNB/Device: SCR(Unicable/Jess)
SCR (Unicable/JESS) type: LNB
Manufacturer: Inverto
Model: IDLU-32UL40-UNB00-0PP
Position: 1
Channel: User band 1 (1210)
Connected: No
DiSEqC mode: None
Force legacy signal stats: No

Tuner B
Configuration mode: Advanced
Satellite: 28.2E
LNB: LNB 1
Priority: Auto
Type of LNB/Device: SCR(Unicable/Jess)
SCR (Unicable/JESS) type: LNB
Manufacturer: Inverto
Model: IDLU-32UL40-UNB00-0PP
Position: 1
Channel: User band 2 (1420)
Connected: Yes
Connected to: Tuner A (one with wire attached)
DiSEqC mode: None
Force legacy signal stats: No

Tuner C
Configuration mode: Advanced
Satellite: 28.2E
LNB: LNB 1
Priority: Auto
Type of LNB/Device: SCR(Unicable/Jess)
Manufacturer: Inverto
Model: IDLU-32UL40-UNB00-0PP
Position: 1
Channel: User band 3 (1680)
Connected: Yes
Connected to: Tuner A (one with wire attached)
DiSEqC mode: None
Force legacy signal stats: No

Tuner D
Configuration mode: Advanced
Satellite: 28.2E
LNB: LNB 1
Priority: Auto
Type of LNB/Device: SCR(Unicable/Jess)
Manufacturer: Inverto
Model: IDLU-32UL40-UNB00-0PP
Position: 1
Channel: User band 4 (2040)
Connected: Yes
Connected to: Tuner A (one with wire attached)
DiSEqC mode: None
Force legacy signal stats: No

Tuner E
Configuration mode: Advanced
Satellite: 28.2E
LNB: LNB 1
Priority: Auto
Type of LNB/Device: SCR(Unicable/Jess)
Manufacturer: Inverto
Model: IDLU-32UL40-UNB00-0PP
Position: 1
Channel: User band 5(984)
Connected: Yes
Connected to: Tuner A (one with wire attached)
DiSEqC mode: None
Force legacy signal stats: No

Tuner F
Configuration mode: Advanced
Satellite: 28.2E
LNB: LNB 1
Priority: Auto
Type of LNB/Device: SCR(Unicable/Jess)
Manufacturer: Inverto
Model: IDLU-32UL40-UNB00-0PP
Position: 1
Channel: User band 6(1020)
Connected: Yes
Connected to: Tuner A (one with wire attached)
DiSEqC mode: None
Force legacy signal stats: No

Tuner G
Configuration mode: Advanced
Satellite: 28.2E
LNB: LNB 1
Priority: Auto
Type of LNB/Device: SCR(Unicable/Jess)
Manufacturer: Inverto
Model: IDLU-32UL40-UNB00-0PP
Position: 1
Channel: User band 7(1056)
Connected: Yes
Connected to: Tuner A (one with wire attached)
DiSEqC mode: None
Force legacy signal stats: No

Tuner H
Configuration mode: Advanced
Satellite: 28.2E
LNB: LNB 1
Priority: Auto
Type of LNB/Device: SCR(Unicable/Jess)
Manufacturer: Inverto
Model: IDLU-32UL40-UNB00-0PP
Position: 1
Channel: User band 8 (1092)
Connected: Yes
Connected to: Tuner A (one with wire attached)
DiSEqC mode: None
Force legacy signal stats: No



Ron

[abu baniaz]

If following above guide for a different device, adjust the manufacturer and model names.
Ensure that no SCR channel is assigned to more than one tuner across all receivers accessing the LNB


The sponsor sells a 24 channel LNB which is more than adequate for most people.

https://www.world-of-satellite.co.uk...e-II-24scr-lnb

[asktrevis]

Hello, thanks. I've got a FBC (vu duo 4k) tuner connected to a Spaun 21 F with only 2 user bands (SCRS). Does that limit me to use only tuner A and B (connected to A) and leave C-H in FBC automatic mode? In FBC automatic it seems that I am only able to record two channels and then I am restricted to a subset of channels...
Regards

[abu baniaz]

I would attach cables to both physical tuners and leave the other 6 as FBC automatic.

Best to get a switch with more SCRs

[Tump]

Hi all, just changed my LNB to the same Inverto one as detailed here, and set up all 8 tuners as per above. I have a Duo 4k, with a splitter behind the tv, so two feeds to the dual tuner card.
The issue is that when I try and record more than 3 programs at once, I am getting a conflict report. What have I done wrong?

[Trial]

Hi,
which dual tuner card? With one cable from an JESS/UniCable II LNB you can use all 8 transponder and there should be no conflict. I use only 1 cable from my JESS switch and quad pip on my 4K VUs (incl. Duo4K) is working perfectly. At least my "normal" DVB-S2 FBC modul has 8 tuner on board and can receive 8 transponder with one cable. I do not know if is also the case with the DVB-S2X FBC because I always read here twin tuner.

Ralf

[abu baniaz]

Can you run his command in Putty/terminal and post back the file it creates in /tmp directory

cat /etc/enigma2/settings | grep config.Nims > /tmp/mytunerconfig.txt

See here if required
https://www.world-of-satellite.com/s...Linux-commands

[Tump]

Sorry if I'm being thick. I've installed putty and run the command - how do I access the tmp file? Tried windows explorer, but ialthough if finds Vuduo4k as a network element, it says it can't access it.

[abu baniaz]

Use Filezilla client (or any other FTP software) to transfer files to/from receiver.

[Huevos]

FTP, e.g. Filezilla.

[Tump]

config.Nims.0.advanced.lnb.1.lof=unicable
config.Nims.0.advanced.lnb.1.scrfrequency=1210
config.Nims.0.advanced.lnb.1.scrList=1
config.Nims.0.advanced.lnb.1.unicable=unicable_lnb
config.Nims.0.advanced.lnb.1.unicableManufacturer= Inverto
config.Nims.0.advanced.lnb.1.unicableProduct=IDLU-32UL40-UNBOO-OPP
config.Nims.0.advanced.sat.192.lnb=1
config.Nims.0.advanced.sat.282.lnb=1
config.Nims.0.advanced.sats=282
config.Nims.0.configMode=advanced
config.Nims.0.diseqcA=282
config.Nims.0.diseqcB=3601
config.Nims.0.diseqcC=3601
config.Nims.0.diseqcD=3601
config.Nims.1.advanced.lnb.1.lof=unicable
config.Nims.1.advanced.lnb.1.scrfrequency=1420
config.Nims.1.advanced.lnb.1.scrList=2
config.Nims.1.advanced.lnb.1.unicable=unicable_lnb
config.Nims.1.advanced.lnb.1.unicableManufacturer= Inverto
config.Nims.1.advanced.lnb.1.unicableProduct=IDLU-32UL40-UNBOO-OPP
config.Nims.1.advanced.sat.192.lnb=1
config.Nims.1.advanced.sat.282.lnb=1
config.Nims.1.advanced.sats=282
config.Nims.1.advanced.unicableconnected=True
config.Nims.1.advanced.unicableconnectedTo=0
config.Nims.1.configMode=advanced
config.Nims.1.diseqcA=282
config.Nims.1.diseqcB=3601
config.Nims.1.diseqcC=3601
config.Nims.1.diseqcD=3601
config.Nims.2.advanced.lnb.1.lof=unicable
config.Nims.2.advanced.lnb.1.scrfrequency=1680
config.Nims.2.advanced.lnb.1.scrList=3
config.Nims.2.advanced.lnb.1.unicable=unicable_lnb
config.Nims.2.advanced.lnb.1.unicableManufacturer= Inverto
config.Nims.2.advanced.lnb.1.unicableProduct=IDLU-32UL40-UNBOO-OPP
config.Nims.2.advanced.sat.282.lnb=1
config.Nims.2.advanced.sats=282
config.Nims.2.advanced.unicableconnected=True
config.Nims.2.advanced.unicableconnectedTo=0
config.Nims.2.configMode=advanced
config.Nims.3.advanced.lnb.1.lof=unicable
config.Nims.3.advanced.lnb.1.scrfrequency=2040
config.Nims.3.advanced.lnb.1.scrList=4
config.Nims.3.advanced.lnb.1.unicable=unicable_lnb
config.Nims.3.advanced.lnb.1.unicableManufacturer= Inverto
config.Nims.3.advanced.lnb.1.unicableProduct=IDLU-32UL40-UNBOO-OPP
config.Nims.3.advanced.sat.192.lnb=1
config.Nims.3.advanced.unicableconnected=True
config.Nims.3.advanced.unicableconnectedTo=0
config.Nims.3.configMode=advanced
config.Nims.4.advanced.lnb.1.lof=unicable
config.Nims.4.advanced.lnb.1.scrList=5
config.Nims.4.advanced.lnb.1.unicable=unicable_lnb
config.Nims.4.advanced.lnb.1.unicableManufacturer= Inverto
config.Nims.4.advanced.lnb.1.unicableProduct=IDLU-32UL40-UNBOO-OPP
config.Nims.4.advanced.sat.192.lnb=1
config.Nims.4.advanced.unicableconnected=True
config.Nims.4.advanced.unicableconnectedTo=0
config.Nims.4.configMode=advanced
config.Nims.5.advanced.lnb.1.lof=unicable
config.Nims.5.advanced.lnb.1.scrList=6
config.Nims.5.advanced.lnb.1.unicable=unicable_lnb
config.Nims.5.advanced.lnb.1.unicableManufacturer= Inverto
config.Nims.5.advanced.lnb.1.unicableProduct=IDLU-32UL40-UNBOO-OPP
config.Nims.5.advanced.sat.192.lnb=1
config.Nims.5.advanced.unicableconnected=True
config.Nims.5.advanced.unicableconnectedTo=0
config.Nims.5.configMode=advanced
config.Nims.6.advanced.lnb.1.lof=unicable
config.Nims.6.advanced.lnb.1.scrList=7
config.Nims.6.advanced.lnb.1.unicable=unicable_lnb
config.Nims.6.advanced.lnb.1.unicableManufacturer= Inverto
config.Nims.6.advanced.lnb.1.unicableProduct=IDLU-32UL40-UNBOO-OPP
config.Nims.6.advanced.sat.192.lnb=1
config.Nims.6.advanced.unicableconnected=True
config.Nims.6.advanced.unicableconnectedTo=0
config.Nims.6.configMode=advanced
config.Nims.7.advanced.lnb.1.lof=unicable
config.Nims.7.advanced.lnb.1.scrList=8
config.Nims.7.advanced.lnb.1.unicable=unicable_lnb
config.Nims.7.advanced.lnb.1.unicableManufacturer= Inverto
config.Nims.7.advanced.lnb.1.unicableProduct=IDLU-32UL40-UNBOO-OPP
config.Nims.7.advanced.sat.192.lnb=1
config.Nims.7.advanced.unicableconnected=True
config.Nims.7.advanced.unicableconnectedTo=0
config.Nims.7.configMode=advanced

[abu baniaz]

Which satellite are you configuring this for? 19.2 or 28.2?

[Tump]

it's for 28.2

[Tump]

Ah - well spotted! Just seen the problem.

[abu baniaz]

Make sure you disable 19.2 on all tuners where the mistake has been made. A common mistake is to add 28.2 and leave the incorrect one there.