Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
.... and which image version (this is a year old thread).
Hello Ccs and Andy,
My receiver is Vu+ Solo 4K and my image is openvix-5.1.013
I update my profile
Hello Ccs and Andy,
My receiver is Vu+ Solo 4K and my image is openvix-5.1.013
(I updated my signature )
Last edited by houbahop; 08-02-18 at 06:01.
STB Vu+ solo 4K,
TV LG OLED55B6V
OpenATV 6.1 in flash, OpenVix 5.1.013, blackhole 3.04 in usb 3 multiboot
So you have posted in the Octagon section which had an entirely different driver issue.
Also its not clear whether you don‘t see 2160 in the setup or you just get a black screen if you try it????
Can you post in the correct section.
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................
Vu+ Uno4KSE, Dreambox dm900
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
2160p works fine on both my Vu+ Solo 4K & Vu+ Ultimo 4K receivers. I have a 55” Inch Curved OLED LG Television.
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
Hi,
on my Solo4K with Samsung UHD it also works. Problem might be that some older TV sets only support 2160p26/30 and this results in a black screen. Sometimes only certain HDMI inputs support 2160p60 while the other only support p30 so take a look in the manual.
ciao
---
Sat:VU+ Ultimo4K/Solo4K/Duo2/2*Solo2/Ultimo
Remote: Harmony 200, 700, Link, Smart Control, Smart Companion, Elite, 2*Ultimate, Keyboard
I had to buy a new 4k tv for mine to work. as it was based on the 1.4HDMI port and wasn't 2.2 any excuse to get a new toy
PLEASE DO NOT PM IN REGARDS TO CS TALK OR OTHER ILEGAL MATTERS. IT WILL BE REPORTED TO THE ADMINS
Hi,
it is a somewhat old thread but it may be helpful for some user. When using auto resolution switch to 2160 and save it before you activate auto resolution. Up to april 2018 AR is not switching to 2160 if default is 1080 or less.
ciao
---
Sat:VU+ Ultimo4K/Solo4K/Duo2/2*Solo2/Ultimo
Remote: Harmony 200, 700, Link, Smart Control, Smart Companion, Elite, 2*Ultimate, Keyboard