Code:
Trying 192.168.178.29...
Connected to 192.168.178.29.
Escape character is '^]'.
Welcome to OpenViX for mutant51
openvix 5.1 mutant51
mutant51 login: root
Last login: Thu Mar 15 05:35:56 GMT 2018 on pts/0
root@mutant51:~# dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.10.12 (vix@ns3044876.ip-51-255-93.eu) (gcc version 6.3.0 (GCC) ) #1 SMP Sun Nov 19 23:45:55 GMT 2017
[ 0.000000] CPU: ARMv7 Processor [420f00f3] revision 3 (ARMv7), cr=30c5387d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[ 0.000000] OF: fdt:Machine model: BCM97251SSV
[ 0.000000] cma: Reserved 440 MiB at 0x0000000014800000
[ 0.000000] cma: Reserved 192 MiB at 0x0000000030000000
[ 0.000000] cma: Failed to reserve 440 MiB
[ 0.000000] cma: Failed to reserve 192 MiB
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 262144
[ 0.000000] free_area_init_node: node 0, pgdat c0924b80, node_mem_map d3e1c000
[ 0.000000] Normal zone: 1728 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 196608 pages, LIFO batch:31
[ 0.000000] HighMem zone: 65536 pages, LIFO batch:15
[ 0.000000] percpu: Embedded 14 pages/cpu @d3ddd000 s26764 r8192 d22388 u57344
[ 0.000000] pcpu-alloc: s26764 r8192 d22388 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260416
[ 0.000000] Kernel command line: brcm_cma=440M@328M brcm_cma=192M@768M root=/dev/mmcblk0p3 rw rootwait hd51_4.boxmode=1 brcm_cma=440M@328M brcm_cma=192M@768M console=ttyS0,115200
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)[ 0.000000] Memory: 380552K/1048576K available (6677K kernel code, 364K rwdata, 1824K rodata, 340K init, 217K bss, 20856K reserved, 647168K cma-reserved, 65536K highmem)
[ 0.000000] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xf0800000 - 0xff800000 ( 240 MB)
lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc068db00 (6679 kB)
.init : 0xc0885000 - 0xc08da000 ( 340 kB)
.data : 0xc08da000 - 0xc0935378 ( 365 kB)
.bss : 0xc0937000 - 0xc096d434 ( 218 kB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xf0805000, parent irq: 16)
[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xf0807000, parent irq: 17)
[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xf0809640, parent irq: 18)
[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xf080b200, parent irq: 19)
[ 0.000000] irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xfc40a700, parent IRQ(s): 2)
[ 0.000000] irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xf080d380, parent IRQ(s): 3)
[ 0.000000] brcmstb: biuctrl: MCP: Write pairing already disabled
[ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 27.00MHz (virt).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x63a1e71a3, max_idle_ns: 440795203123 ns
[ 0.000003] sched_clock: 56 bits at 27MHz, resolution 37ns, wraps every 4398046511093ns
[ 0.000011] Switching to timer-based delay loop, resolution 37ns
[ 0.000300] Console: colour dummy device 80x30
[ 0.000319] Calibrating delay loop (skipped), value calculated using timer frequency.. 54.00 BogoMIPS (lpj=27000)
[ 0.000329] pid_max: default: 32768 minimum: 301
[ 0.000439] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000446] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000904] CPU: Testing write buffer coherency: ok
[ 0.001156] CPU0: update cpu_capacity 1024
[ 0.001163] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.001372] Setting up static identity map for 0x8440 - 0x8498
[ 0.003407] smp: Bringing up secondary CPUs ...
[ 0.004130] CPU1: update cpu_capacity 1024
[ 0.004133] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.004195] smp: Brought up 1 node, 2 CPUs
[ 0.004206] SMP: Total of 2 processors activated (108.00 BogoMIPS).
[ 0.004212] CPU: All CPU(s) started in SVC mode.
[ 0.004605] devtmpfs: initialized
[ 0.011118] VFP support v0.3: implementor 42 architecture 4 part 00 variant 0 rev 0
[ 0.011313] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.011334] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.025270] NET: Registered protocol family 16
[ 0.025745] DMA: preallocated 256 KiB pool for atomic coherent allocations[ 0.031409] cpuidle: using governor ladder
[ 0.035368] cpuidle: using governor menu
[ 0.043897] No ATAGs?
[ 0.044588] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.044599] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.059634] SCSI subsystem initialized
[ 0.060002] libata version 3.00 loaded.
[ 0.060229] usbcore: registered new interface driver usbfs
[ 0.060277] usbcore: registered new interface driver hub
[ 0.060323] usbcore: registered new device driver usb
[ 0.060374] Linux cec interface: v0.10
[ 0.060409] Linux video capture interface: v2.00
[ 0.060466] pps_core: LinuxPPS API ver. 1 registered
[ 0.060470] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.060487] PTP clock support registered
[ 0.061122] Advanced Linux Sound Architecture Driver Initialized.
[ 0.062486] clocksource: Switched to clocksource arch_sys_counter
[ 0.062759] FS-Cache: Loaded
[ 0.068978] NET: Registered protocol family 2
[ 0.069361] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.069401] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.069474] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.069560] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.069585] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.069695] NET: Registered protocol family 1
[ 0.070158] RPC: Registered named UNIX socket transport module.
[ 0.070164] RPC: Registered udp transport module.
[ 0.070167] RPC: Registered tcp transport module.
[ 0.070171] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.070179] PCI: CLS 0 bytes, default 64
[ 0.070543] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
[ 0.071864] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[ 0.072500] FS-Cache: Netfs 'nfs' registered for caching
[ 0.072629] NFS: Registering the id_resolver key type
[ 0.072648] Key type id_resolver registered
[ 0.072652] Key type id_legacy registered
[ 0.072665] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.072669] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 0.072839] FS-Cache: Netfs 'cifs' registered for caching
[ 0.072892] Key type cifs.spnego registered
[ 0.073031] fuse init (API version 7.26)
[ 0.074928] bounce: pool size: 64 pages
[ 0.074974] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.074982] io scheduler noop registered
[ 0.074988] io scheduler deadline registered
[ 0.075018] io scheduler cfq registered (default)
[ 0.075294] brcm-gisb-arb f0400000.gisb-arb: registered mem: f0a09000, irqs: 47, 48
[ 0.075600] brcm-sata-phy f0458100.sata-phy: registered 1 port(s)
[ 0.076030] brcm-cma brcm-cma.0: Initialized Broadcom CMA root device
[ 0.076623] brcm-cma brcm-cma.0: Added CMA device @ PA=0x14800000 LEN=0x1b800000
[ 0.077140] brcm-cma brcm-cma.1: Added CMA device @ PA=0x30000000 LEN=0xc000000
[ 0.111973] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.113552] console [ttyS0] disabled
[ 0.113591] f040a900.serial: ttyS0 at MMIO 0xf040a900 (irq = 34, base_baud = 5062500) is a 16550A
[ 0.822843] console [ttyS0] enabled
[ 0.826908] f040a940.serial: ttyS1 at MMIO 0xf040a940 (irq = 35, base_baud = 5062500) is a 16550A
[ 0.836247] f040a980.serial: ttyS2 at MMIO 0xf040a980 (irq = 36, base_baud = 5062500) is a 16550A
[ 0.852549] brd: module loaded
[ 0.859387] loop: module loaded
[ 0.863379] OF: /rdb/sata@f045a000/sata-port@0: could not get #phy-cells for /rdb/sata-phy@f0458100
[ 0.872556] brcm-ahci f045a000.sata: masking port_map 0x3 -> 0x1
[ 0.878630] brcm-ahci f045a000.sata: SSS flag set, parallel bus scan disabled
[ 0.895868] brcm-ahci f045a000.sata: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x1 impl platform mode
[ 0.904849] brcm-ahci f045a000.sata: flags: 64bit ncq sntf stag pm clo pmp slum part
[ 0.913994] scsi host0: brcm-ahci
[ 0.917591] scsi host1: brcm-ahci
[ 0.921077] ata1: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x100 irq 44
[ 0.929009] ata2: DUMMY
[ 0.931469] brcm-ahci f045a000.sata: Broadcom AHCI SATA3 registered
[ 0.938616] libphy: Fixed MDIO Bus: probed
[ 0.943042] bcmgenet f0b00000.ethernet: GENET 4.5 EPHY: 0x1001
[ 0.960829] libphy: bcmgenet MII bus: probed
[ 0.987803] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 0.993656] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.017608] ehci-brcm: EHCI BRCM driver
[ 1.021573] ehci-brcm f0470300.ehci: EHCI Host Controller
[ 1.027008] ehci-brcm f0470300.ehci: new USB bus registered, assigned bus number 1
[ 1.044711] ehci-brcm f0470300.ehci: irq 147, io mem 0xf0470300
[ 1.056832] ehci-brcm f0470300.ehci: USB 2.0 started, EHCI 1.00
[ 1.063301] hub 1-0:1.0: USB hub found
[ 1.067092] hub 1-0:1.0: 1 port detected
[ 1.071295] ehci-brcm f0470500.ehci: EHCI Host Controller
[ 1.076724] ehci-brcm f0470500.ehci: new USB bus registered, assigned bus number 2
[ 1.094412] ehci-brcm f0470500.ehci: irq 148, io mem 0xf0470500
[ 1.106833] ehci-brcm f0470500.ehci: USB 2.0 started, EHCI 1.00
[ 1.113208] hub 2-0:1.0: USB hub found
[ 1.116991] hub 2-0:1.0: 1 port detected
[ 1.121119] ohci-brcm: OHCI BRCM driver
[ 1.125123] ohci-brcm f0470400.ohci: BRCM OHCI controller
[ 1.130550] ohci-brcm f0470400.ohci: new USB bus registered, assigned bus number 3
[ 1.138195] ohci-brcm f0470400.ohci: irq 149, io mem 0xf0470400
[ 1.200229] hub 3-0:1.0: USB hub found
[ 1.204018] hub 3-0:1.0: 1 port detected
[ 1.208169] ohci-brcm f0470600.ohci: BRCM OHCI controller
[ 1.208847] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.219790] ohci-brcm f0470600.ohci: new USB bus registered, assigned bus number 4
[ 1.220284] ata1.00: ATA-8: OCZ-AGILITY3, 2.22, max UDMA/133
[ 1.220287] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.230236] ata1.00: configured for UDMA/133
[ 1.230600] scsi 0:0:0:0: Direct-Access ATA OCZ-AGILITY3 2.22 PQ: 0 ANSI: 5
[ 1.252323] ohci-brcm f0470600.ohci: irq 150, io mem 0xf0470600
[ 1.272521] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[ 1.280098] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.285501] sd 0:0:0:0: [sda] Write Protect is off
[ 1.290319] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.290442] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.302862] sda: sda1
[ 1.306084] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.314424] hub 4-0:1.0: USB hub found
[ 1.318225] hub 4-0:1.0: 1 port detected
[ 1.322389] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.328958] ehci-pci: EHCI PCI platform driver
[ 1.333479] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.339684] ohci-pci: OHCI PCI platform driver
[ 1.344598] xhci-hcd f0471000.xhci: xHCI Host Controller
[ 1.349947] xhci-hcd f0471000.xhci: new USB bus registered, assigned bus number 5
[ 1.357676] xhci-hcd f0471000.xhci: hcc params 0x0250f17d hci version 0x100 quirks 0x00010010
[ 1.366251] xhci-hcd f0471000.xhci: irq 151, io mem 0xf0471000
[ 1.372745] hub 5-0:1.0: USB hub found
[ 1.376541] hub 5-0:1.0: config failed, hub doesn't have any ports! (err -19)
[ 1.383805] xhci-hcd f0471000.xhci: xHCI Host Controller
[ 1.389140] xhci-hcd f0471000.xhci: new USB bus registered, assigned bus number 6
[ 1.396684] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.405172] hub 6-0:1.0: USB hub found
[ 1.408961] hub 6-0:1.0: 2 ports detected
[ 1.413287] usbcore: registered new interface driver uas
[ 1.418701] usbcore: registered new interface driver usb-storage
[ 1.424804] usb 1-1: new high-speed USB device number 2 using ehci-brcm
[ 1.431625] mousedev: PS/2 mouse device common for all mice
[ 1.437477] i2c /dev entries driver
[ 1.441269] IR NEC protocol handler initialized
[ 1.445821] IR RC5(x/sz) protocol handler initialized
[ 1.450884] IR RC6 protocol handler initialized
[ 1.455447] IR JVC protocol handler initialized
[ 1.459987] IR Sony protocol handler initialized
[ 1.464617] IR SANYO protocol handler initialized
[ 1.469334] IR Sharp protocol handler initialized
[ 1.474050] IR MCE Keyboard/mouse protocol handler initialized
[ 1.479894] IR XMP protocol handler initialized
[ 1.484434] smssdio: Siano SMS1xxx SDIO driver
[ 1.488886] smssdio: Copyright Pierre Ossman
[ 1.493546] sdhci: Secure Digital Host Controller Interface driver
[ 1.499740] sdhci: Copyright(c) Pierre Ossman
[ 1.504105] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.513258] hub 1-1:1.0: USB hub found
[ 1.517181] hub 1-1:1.0: 4 ports detected
[ 1.542837] mmc0: SDHCI controller on f03e0200.sdhci [f03e0200.sdhci] using ADMA
[ 1.550434] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.556036] usbcore: registered new interface driver usbhid
[ 1.561630] usbhid: USB HID core driver
[ 1.568089] NET: Registered protocol family 17
[ 1.572614] Key type dns_resolver registered
[ 1.577014] ThumbEE CPU extension supported.
[ 1.581303] Registering SWP/SWPB emulation handler
[ 1.593656] ALSA device list:
[ 1.596661] No soundcards found.
[ 1.600649] Waiting for root device /dev/mmcblk0p3...
[ 1.689900] mmc0: new high speed MMC card at address 0001
[ 1.695696] mmcblk0: mmc0:0001 4MEYMA 3.66 GiB
[ 1.700387] mmcblk0boot0: mmc0:0001 4MEYMA partition 1 2.00 MiB
[ 1.706464] mmcblk0boot1: mmc0:0001 4MEYMA partition 2 2.00 MiB
[ 1.712527] mmcblk0rpmb: mmc0:0001 4MEYMA partition 3 128 KiB
[ 1.721794] Alternate GPT is invalid, using primary GPT.
[ 1.727156] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10
[ 1.735317] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities
[ 1.746301] EXT4-fs (mmcblk0p3): warning: mounting fs with errors, running e2fsck is recommended
[ 1.758779] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
[ 1.766942] VFS: Mounted root (ext4 filesystem) on device 179:3.
[ 1.773712] devtmpfs: mounted
[ 1.777095] Freeing unused kernel memory: 340K
[ 1.781553] This architecture does not have kernel memory protection.
[ 1.807849] usb 1-1.1: new full-speed USB device number 3 using ehci-brcm
[ 1.854196] random: fast init done
[ 1.908873] usb 1-1.3: new high-speed USB device number 4 using ehci-brcm
[ 2.048496] Adding 502780k swap on /dev/mmcblk0p10. Priority:-1 extents:1 across:502780k SS
[ 2.700499] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.859286] hd51_1: module_layout: kernel tainted.
[ 2.864114] Disabling lock debugging due to kernel taint
[ 2.869444] hd51_1: loading out-of-tree module taints kernel.
[ 2.876566] usbcore: registered new interface driver tpm
[ 8.515505] input: dreambox remote control (native) as /devices/virtual/input/input0
[ 8.526156] input: dreambox advanced remote control (native) as /devices/virtual/input/input1
[ 8.682444] dvbdev: DVB: registering new adapter (dvb0)
[ 8.690654] platform dvb0.0: DVB: registering adapter 0 frontend 0 (DVB-S2)...
[ 8.709858] platform dvb0.0: DVB: registering adapter 0 frontend 1 (DVB-S2)...
[ 8.969593] input: front panel as /devices/virtual/input/input2
[ 8.992728] Registered IR keymap rc-cec
[ 8.996900] input: RC for hdmi_cec as /devices/platform/hdmi.0/rc/rc0/input3
[ 9.007118] rc rc0: RC for hdmi_cec as /devices/platform/hdmi.0/rc/rc0
[ 9.103860] SGI XFS with security attributes, realtime, no debug enabled
[ 9.429962] usb 1-1.3: dvb_usb_v2: found a 'Realtek RTL2832U reference design' in warm state
[ 9.501240] usb 1-1.3: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[ 9.510931] dvbdev: DVB: registering new adapter (Realtek RTL2832U reference design)
[ 9.528066] i2c i2c-8: Added multiplexed i2c bus 9
[ 9.532931] rtl2832 8-0010: Realtek RTL2832 successfully attached
[ 9.539107] usb 1-1.3: DVB: registering adapter 1 frontend 0 (Realtek RTL2832 (DVB-T))...
[ 9.555280] r820t 9-001a: creating new instance
[ 9.569735] r820t 9-001a: Rafael Micro r820t successfully identified
[ 9.595896] Registered IR keymap rc-empty
[ 9.600160] input: Realtek RTL2832U reference design as /devices/platform/f0470300.ehci/usb1/1-1/1-1.3/rc/rc1/input4
[ 9.613555] rc rc1: Realtek RTL2832U reference design as /devices/platform/f0470300.ehci/usb1/1-1/1-1.3/rc/rc1
[ 9.626445] input: MCE IR Keyboard/Mouse (dvb_usb_rtl28xxu) as /devices/virtual/input/input5
[ 9.635401] usb 1-1.3: dvb_usb_v2: schedule remote query interval to 200 msecs
[ 9.654853] usb 1-1.3: dvb_usb_v2: 'Realtek RTL2832U reference design' successfully initialized and connected
[ 9.665022] usbcore: registered new interface driver dvb_usb_rtl28xxu
[ 9.695089] usbcore: registered new interface driver cdc_acm
[ 9.700804] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 9.825591] EXT4-fs (mmcblk0p3): re-mounted. Opts: data=ordered
[ 11.138889] NET: Registered protocol family 10
[ 11.144654] Segment Routing with IPv6
[ 11.317835] f0b00000.etherne:01: Broadcom BCM7439 (2) PHY revision: 0x10, patch: 1
[ 11.327317] bcmgenet f0b00000.ethernet: configuring instance for internal PHY
[ 11.334579] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 13.971242] bcmgenet f0b00000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 13.979487] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 24.201846] platform dvb0.0: DVB: registering adapter 0 frontend 2 (vtuner)...
[ 24.642313] random: crng init done
[ 332.618616] EXT4-fs (mmcblk0p3): error count since last fsck: 2
[ 332.624577] EXT4-fs (mmcblk0p3): initial error at time 1521044440: ext4_mb_generate_buddy:758
[ 332.633123] EXT4-fs (mmcblk0p3): last error at time 1521044440: ext4_mb_generate_buddy:758
root@mutant51:~#