Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................
Vu+ Uno4KSE, Dreambox dm900
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
sandancer (21-01-18)
Right how is that achieved then
Menu/setup/Network/Device/Adapter settings/
Use dhcp=No
Set an IP address
I always restrict router allocated IP addresses in my router eg 192.168.0.1 -> 99
100 and above I use for static ip‘s
However some routers allow you to fix an IP address in the router setup (e.g. Fritzbox routers)
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................
Vu+ Uno4KSE, Dreambox dm900
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
Another method is to reserve an IP address for a device and this is done in router settings. This is method I use to ensure I always have same IP and I don't have to worry if I update image as it will always have same IP.
can you have client mode and IPTV script on the same machine at the same time?
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
That is not an issue, I can have upto 4 simultaneous feeds. What I am trying to work out is if I just put the IPTV script on the main box and then it works on the Client (I cannot share it this way on say an Emiga2 android player) or the client mode just share physical tuners and I put the script on each machine?
I’m not sure. Only way is to try it, trial & error I guess.
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
Well the problem with trial and error is I have not got the 2nd box get, If you cannot have the script independently on each box it would mean that all boxes would be limited to watching the same channel, and if that is the case this is not the solution for me and no point in buying the extra boxes
If you have IPTV bouquets set up (through for example Suls plugin which supports many providers ) then they will be copied over to the client and will work as any Bouquet service.
Forget the script (unless you cannot use the plugin) in which case you will have to create the Bouquet entries yourself.
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................
Vu+ Uno4KSE, Dreambox dm900
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
I have iPTV bouquets set up but they do not stream for instance if I use the openwebif on my laptop I can stream a sat or cable channel to VLC if I try this with a IPTV channel VLC opens but just stays blank
Never used VLC, so no idea what the issue may be.
Maybe the way you have defined the IPTV streams in the bouquet.
However, IPTV bouquets created by the SULS plugin will work in C/S mode..... as have any other IPTV bouquets I created before SULS.
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................
Vu+ Uno4KSE, Dreambox dm900
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
Client mode copies the bouquets from the main box. That means if you run the script on the main box all the client boxes will have a copy of the IPTV, which they will access directly.
JonMMM (04-02-18)
I am using VU+ Solo 4K as host and Zero as client. As the Zero's tuners are not being used will it output the 4K signal from the host or does one need a 4K client as well?