Is there a website for the Stalker plugin?
Sent from my SM-G935F using Tapatalk
Is there a website for the Stalker plugin?
Sent from my SM-G935F using Tapatalk
ribeirovsky (04-10-18)
Not that I am aware of, although its in use on many platforms
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
antonym (14-01-18)
Any news on the plugin or is there somewhere I can keep a check on its progress? Thanks
Sent from my SM-G935F using Tapatalk
You can see it in the feeds on the current image ... extensions Stalker-QT
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
So it is! Thank you. I've tried installing it and it seems to hang on "Execution progress:" and doesn't do anything else. Any ideas?
It should appear in plugins (Stalker setup) and in Extensions (Blue button) as Stalker
Run Stalker setup 1st. .. it will give you your receivers MAC address, which if your supplier supports MAG devices will allow you to add your device to your account and then you enter your providers url For a MAG device.
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
antonym (23-01-18)
Finally got it to install, needed to switch off openvpn. Do you know what format (url based) the plugin needs as I just get a big blank page.
Sent from my SM-G935F using Tapatalk
Got a little bit further, get to the point where it says LOADING PORTAL, then it's a blank screen. Any ideas?
1. have you done the Stalker setup?
2. If not click on Stalker setup and write down the MAC address.
3. contact your provide or look at their FAQ‘s to see if they support MAG boxes and what format their url is for MAG‘s
4. Assuming they do, my understanding is that you have to go into your account and add a device using the MAC address
5. If 3 & 4 is not possible then the plugin will not work.
6. if you have all that, you get loading portal, blueish screen then a horizontal yellow on black loading bar and lastly your providers portal
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
antonym (24-01-18)
Just waiting to hear back from the provider. Thanks for all the support so far
Sent from my SM-G935F using Tapatalk
Managed to get it all sorted, thank you, however I didn't realise it's a whole different UI. I thought it simply adds a working EPG to your existing setup. Currently the system is missing most of the EPG and crashes if you try to set up a recording in the future. Thank you anyway :-)
Could be provider dependent
EPG - have not seen any issues, its really pretty comprehensive
Recording/Downloads - never seen this work . but doesn't crash.
However, watching an IPTV stream works consistently better than through E2 directly.
Also times are local based and not able to change to local
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
antonym (25-01-18)
am on the latest image and I don't see it!
PLEASE DO NOT PM IN REGARDS TO CS TALK OR OTHER ILEGAL MATTERS. IT WILL BE REPORTED TO THE ADMINS
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
john doe (26-01-18)