Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Results 1 to 10 of 10

Thread: Ultimo 4K with HDMI 1.4 TV/AVR

  1. #1

    Title
    Moderator
    Join Date
    Jul 2011
    Location
    germania
    Posts
    5,140
    Thanks
    107
    Thanked 1,439 Times in 1,141 Posts

    Ultimo 4K with HDMI 1.4 TV/AVR

    Hi,
    does anyone has a 4K-Box (I tested Solo 4K and Ultimo 4K) with a TV or AVR which only has HDMI 1.4 (4K only with 24/25/30Hz)? Could you test the following:
    connect to box with telnet and then:

    cd /proc/stb/video
    echo 2160p25 >videomode

    Normal 4K mode is either 2160p50 or 2160p60 which older 4K devices cannot handle. With the telnet commands the box will be set to 2160p25 which might work. My Samsung showed that the box delivers 2160p25 but the question is still are there more differences between HDMI 2 and 1.4. If this trick works (someone sees a picture in 4K from the box) maybe the format 2160p25 and 2160p30 should be available in video settings to select.

    ciao
    Last edited by Trial; 14-01-18 at 14:22.
    ---
    Sat:VU+ Ultimo4K/Solo4K/Duo2/2*Solo2/Ultimo
    Remote: Harmony 200, 700, Link, Smart Control, Smart Companion, Elite, 2*Ultimate, Keyboard

  2. The Following User Says Thank You to Trial For This Useful Post:

    john doe (12-01-18)

  3. #2

    Title
    Forum Supporter
    Donated Member
    Join Date
    Jul 2014
    Location
    God Knows
    Posts
    1,694
    Thanks
    582
    Thanked 266 Times in 247 Posts
    i did have a 4k tv which was 1.4 HDMI connected to sf4008, but could only get 1080p to work. I can try yo test tomorrow, or even this afternoon, depending
    PLEASE DO NOT PM IN REGARDS TO CS TALK OR OTHER ILEGAL MATTERS. IT WILL BE REPORTED TO THE ADMINS

  4. The Following User Says Thank You to john doe For This Useful Post:

    Sicilian (13-01-18)

  5. #3

    Title
    Forum Supporter
    Donated Member
    Join Date
    Jul 2014
    Location
    God Knows
    Posts
    1,694
    Thanks
    582
    Thanked 266 Times in 247 Posts

    Telnet test

    Tested with sf4008 and old LG smart TV 4k with HDMI 1.4 ports.

    Results in picture. didn't work

    1.4HDMI.jpg
    Last edited by john doe; 14-01-18 at 11:47. Reason: forgot yo add info
    PLEASE DO NOT PM IN REGARDS TO CS TALK OR OTHER ILEGAL MATTERS. IT WILL BE REPORTED TO THE ADMINS

  6. #4
    ccs's Avatar
    Title
    ViX Beta Tester
    Join Date
    Sep 2014
    Posts
    5,836
    Thanks
    554
    Thanked 1,277 Times in 1,089 Posts
    It probably should be videomode, not videmode.

  7. #5

    Title
    Moderator
    Join Date
    Jul 2011
    Location
    germania
    Posts
    5,140
    Thanks
    107
    Thanked 1,439 Times in 1,141 Posts
    Hi,
    yes of course my mistake. videomode is correct.

    Ralf
    ---
    Sat:VU+ Ultimo4K/Solo4K/Duo2/2*Solo2/Ultimo
    Remote: Harmony 200, 700, Link, Smart Control, Smart Companion, Elite, 2*Ultimate, Keyboard

  8. The Following User Says Thank You to Trial For This Useful Post:

    john doe (14-01-18)

  9. #6

    Title
    Forum Supporter
    Donated Member
    Join Date
    Jul 2014
    Location
    God Knows
    Posts
    1,694
    Thanks
    582
    Thanked 266 Times in 247 Posts
    Quote Originally Posted by Trial View Post
    Hi,
    yes of course my mistake. videomode is correct.

    Ralf
    Will have to do this tomorrow morning and report back
    PLEASE DO NOT PM IN REGARDS TO CS TALK OR OTHER ILEGAL MATTERS. IT WILL BE REPORTED TO THE ADMINS

  10. The Following User Says Thank You to john doe For This Useful Post:

    Sicilian (15-01-18)

  11. #7

    Title
    Forum Supporter
    Donated Member
    Join Date
    Jul 2014
    Location
    God Knows
    Posts
    1,694
    Thanks
    582
    Thanked 266 Times in 247 Posts
    sorry this has taken longer than expected, with work.

    just tested now.

    putty ok after spelling issue- see picture

    setting resolution worked on 1.4hdmi port LG TV 4K the TV is about 3 and half years old- see picture. you can cleary see 2160p set

    tuner fail - I received tuner failed when trying to open BBC, channel 4 or ITV. tried re-tuning and changing the sat cable around between tuner I and 2 on the receiver- see picture.

    However, I can confirm that IPTV worked fine, looked great!

    sorry picture not aligned



    noraml channel.jpgputty outcome.jpgsettings resolution.jpgtuner failed.jpg
    PLEASE DO NOT PM IN REGARDS TO CS TALK OR OTHER ILEGAL MATTERS. IT WILL BE REPORTED TO THE ADMINS

  12. #8

    Title
    Moderator
    Join Date
    Jul 2011
    Location
    germania
    Posts
    5,140
    Thanks
    107
    Thanked 1,439 Times in 1,141 Posts
    Hi,
    it looks as if 25/30 will not make it in the image as it is seen as not useful or so.

    ciao
    ---
    Sat:VU+ Ultimo4K/Solo4K/Duo2/2*Solo2/Ultimo
    Remote: Harmony 200, 700, Link, Smart Control, Smart Companion, Elite, 2*Ultimate, Keyboard

  13. The Following User Says Thank You to Trial For This Useful Post:

    john doe (16-01-18)

  14. #9
    Sicilian's Avatar
    Title
    The Boss
    Join Date
    Mar 2010
    Posts
    29,666
    Thanks
    23,604
    Thanked 26,081 Times in 7,641 Posts
    Quote Originally Posted by Trial View Post
    Hi,
    it looks as if 25/30 will not make it in the image as it is seen as not useful or so.

    ciao
    We did used to have these settings but where removed. I'll look into it.
    D I S C L A I M E R

    My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!

    Please help keep OpenViX online, donate HERE.
    Rules can be found
    HERE
    Support our sponsor World-Of-Satellite
    HERE
    GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
    Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable





  15. The Following User Says Thank You to Sicilian For This Useful Post:

    john doe (17-01-18)

  16. #10

    Title
    Moderator
    Join Date
    Jul 2011
    Location
    germania
    Posts
    5,140
    Thanks
    107
    Thanked 1,439 Times in 1,141 Posts
    Quote Originally Posted by Sicilian View Post
    We did used to have these settings but where removed. I'll look into it.
    Hi,
    as a workaround in latest image Ar will switch to 25/30 for 4K will workaround.

    Ciao

    Gesendet von meinem SGP621 mit Tapatalk
    ---
    Sat:VU+ Ultimo4K/Solo4K/Duo2/2*Solo2/Ultimo
    Remote: Harmony 200, 700, Link, Smart Control, Smart Companion, Elite, 2*Ultimate, Keyboard

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.