I presume this is the Uno 4K you bought, not a Solo 4K. Important for tuner issues.
Anyway, the error message is stating error on tuner H but you screenshot is of Tuner A.
Can you double check the tuner configuration of tuner H?
Check you can receiver 299000 KHz, 6887 symbol rate, QAM 64 on Tuner H in signal finder. Please post a screenshot of it.
Check you can receiver 299000 KHz, 6887 symbol rate, QAM 256 on Tuner H in signal finder. Please post a screenshot of it.
Please also attach your two lamedb files. They are located in /etc/enigma2/ You will need to zip them before you can attach them.
Just for reference purposes
Code:
< 466.856> [ABM-config] providers: cable_ie_mk2:hd_43217:189:
< 428.541> [NimManager] slotname = Tuner A, slotdescription = Vuplus DVB-C NIM(BCM3148), multitype = 0
< 428.542> [NimManager] slotname = Tuner B, slotdescription = Vuplus DVB-C NIM(BCM3148), multitype = 0
< 428.542> [NimManager] slotname = Tuner C, slotdescription = Vuplus DVB-C NIM(BCM3148), multitype = 0
< 428.542> [NimManager] slotname = Tuner D, slotdescription = Vuplus DVB-C NIM(BCM3148), multitype = 0
< 428.542> [NimManager] slotname = Tuner E, slotdescription = Vuplus DVB-C NIM(BCM3148), multitype = 0
< 428.542> [NimManager] slotname = Tuner F, slotdescription = Vuplus DVB-C NIM(BCM3148), multitype = 0
< 428.542> [NimManager] slotname = Tuner G, slotdescription = Vuplus DVB-C NIM(BCM3148), multitype = 0
< 428.542> [NimManager] slotname = Tuner H, slotdescription = Vuplus DVB-C NIM(BCM3148), multitype = 0
< 467.392> [eDVBFrontend] tuning to 299000 khz, sr 6887000, fec 0, modulation 0, inversion 2