Mutant HD 2400 not booting through

**Nunhead_Man** · 13-06-17, 19:24

My Mutant HD 2400 is not booting through - it gets as far as driving the screen and showing the initial image with a spinning icon but goes not further

I'm running openvix-4.2.030.release-mutant2400_usb

Sugestions?

**Andy_Hazza** · 13-06-17, 19:40

Try 5.0.016, that is the latest ViX image.

Sent from my iPhone using Tapatalk

**Nunhead_Man** · 14-06-17, 13:05

Thanks - will do and report back

**Nunhead_Man** · 24-06-17, 14:34

OK - now flashed and seems OK

I had thought this was not going to be updated but very glad it is

**Andy_Hazza** · 24-06-17, 14:45

Its a solid receiver and still being maintained via ViX.

Sent from my iPhone using Tapatalk

**Nunhead_Man** · 02-10-17, 14:06

Hi

As I see - now going to 5_0_027 - after box was not dispalying anything on the screen

**Nunhead_Man** · 02-10-17, 14:39

And after reflashing it seems to be asking for an output (HDMI etc) when all that is plugged in is HDMI

Am I doing something wrong?

**wullboy** · 02-10-17, 15:17

No, just go through the set-up procedure m8...???

**Nunhead_Man** · 02-10-17, 16:52

Originally Posted by wullboy

No, just go through the set-up procedure m8...???

Errr - dificult if it is not on screen

Any hints?

And m8 = mate?

**ccs** · 02-10-17, 16:56

Is hdmi input selected on the tv?

**Nunhead_Man** · 02-10-17, 16:59

Originally Posted by ccs

Is hdmi input selected on the tv?

Errr - it is certainly plugged into an HDMI port but this quite a new TV and oddly only shows adjustments for 2 of the three HDMI inputs- but both of those are showing HDMI in

**wullboy** · 03-10-17, 07:54

Err..try changing the cable then m8 [ faulty lead ] it is possible ???

**Nunhead_Man** · 03-10-17, 09:15

Originally Posted by wullboy

Err..try changing the cable then m8 [ faulty lead ] it is possible ???

Thanks but I have changed to known working cable.

I get a screen on the Mutant display (not the TV screen ) saying "choose output" e.g. HDMI - but cannot select it with any of the buttons on the HD2400.

**ccs** · 03-10-17, 09:37

Originally Posted by Nunhead_Man

Thanks but I have changed to known working cable.

I get a screen on the Mutant display (not the TV screen ) saying "choose output" e.g. HDMI - but cannot select it with any of the buttons on the HD2400.

The OK button on the remote is the one to use, however, the tv screen should be showing the setup dialogue.

**ronand** · 03-10-17, 10:23

Make sure when changing cables to have everything physically powered off - its easy to damage a hdmi socket. Also use a different socket on the TV

Thread: Mutant HD 2400 not booting through

Thread Tools

Display

Mutant HD 2400 not booting through

The Following User Says Thank You to Andy_Hazza For This Useful Post:

The Following User Says Thank You to ronand For This Useful Post:

Posting Permissions

Options

About

Site Links

Social Media