Terrestrial picture randomly breaking up - reboot receiver fixes it

[ccs]

What happens if you disconnect the tuner RF out connection to the tv?

[Stuey2017a]

I will try this later and let you know .. will test it once the issue has reoccurred.
thanks again for the help.

[goRt]

What happens if you disconnect the tuner RF out connection to the tv?

I only have the RF connected to the sf4008, I don't have a secondary cable (other than HDMI)

Maybe indicate who your question is directed to?

Sent from my SM-G950F using Tapatalk

[ccs]

I only have the RF connected to the sf4008, I don't have a secondary cable (other than HDMI)

Maybe indicate who your question is directed to?

.... the OP who had said that RF out was connected to his tv.

[Stuey2017a]

Thanks ccs, as mentioned I will try this later and let you know..

[Stuey2017a]

Just happened again, I removed the coax from the RF Out to the TV, but no difference. I have scheduled another recording (same multiplex/channel) to see if I can force the issue to occur.
Any other ideas or suggestion will be most welcome

[goRt]

Just happened again, I removed the coax from the RF Out to the TV, but no difference. I have scheduled another recording (same multiplex/channel) to see if I can force the issue to occur.
Any other ideas or suggestion will be most welcome

For me tuner a causes the problem, I've disabled it forcing b and had no issues. I've now re-enabled but have tuner b set as priority for recordings.

Sent from my SM-G950F using Tapatalk

[Stuey2017a]

Thanks goRT, I will try that later. If it is Tuner A issue, that mean its a Physical Tuner/card issue right (and for me to contact WoS to see if I can get it replaced)?

[goRt]

Thanks goRT, I will try that later. If it is Tuner A issue, that mean its a Physical Tuner/card issue right (and for me to contact WoS to see if I can get it replaced)?

I can't say if it's hardware or software. Earlier posts indicated dvb-s becoming pixelated on recordings (which I notice)
It's not clear in my mind, but the box is new and there's lots of work going g on.
When I get internet installed on Friday I may test openatv which is under more active development.

Wos will have mine back too if this is hardware.

Sent from my SM-G950F using Tapatalk

[ccs]

If there's anyone with the same setup running an older version of vix which is working ok it would be helpful to know.

[mrxbox360]

ive the same issue on mine & im using a twin dvb c tuner only, im going to try disabling my dvb s tuner & see if this helps or cures this.

[goRt]

ive the same issue on mine & im using a twin dvb c tuner only, im going to try disabling my dvb s tuner & see if this helps or cures this.

For me it's the first hybrid that causes the issue. Sat recording causes very minor pixelation on the dvb-t part.

Good to know others are experiencing the same issue, what is are you running?

Thanks

Sent from my SM-G950F using Tapatalk

[Sicilian]

This has to be a driver issue thats crept it. New image will be built next week with latest drivers.

In the mean time can one of you guys test an earlier image build: http://www.openvix.co.uk/index.php/d...images/sf4008/

Also send reports of your issue to:

support@octagon-germany.de

I've reported this thread to them.

[goRt]

This has to be a driver issue thats crept it. New image will be built next week with latest drivers.

In the mean time can one of you guys test an earlier image build: http://www.openvix.co.uk/index.php/d...images/sf4008/

Also send reports of your issue to:

support@octagon-germany.de

I've reported this thread to them.

I can test earlier builds after the internet arrives on Friday if no one else has by then.

Sent from my SM-G950F using Tapatalk

[Sicilian]

I can test earlier builds after the internet arrives on Friday if no one else has by then.

Sent from my SM-G950F using Tapatalk

Internet is not needed, tests like this should be done on free to air channels only.