Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Page 1 of 2 12 LastLast
Results 1 to 15 of 20

Thread: Recording problem

  1. #1

    Title
    Member
    Join Date
    Apr 2013
    Posts
    85
    Thanks
    3
    Thanked 3 Times in 3 Posts

    Angry Recording problem

    Hi.
    I have a problem with recording with my VU + Duo does not want to change satellite.
    If I programmed recording on Thor 0.8W and my box is set to a channel of 13.0E then nothing will be recorded at all.
    Hope someone can help me with this thanks.
    I am using a V-box2 (36V) to change satellite

    I use Open Wix 5 0 023 and i set recording from EPG
    The strange thing is that the dish moves quite well when I choose channels from all other menus

    Tested now with my VU + Solo2 and it worked just like I wanted the dish moved to the right satellite and started recording.
    Have the same image on it so no difference

  2. #2

    Title
    Senior Member
    Join Date
    Jan 2014
    Posts
    589
    Thanks
    56
    Thanked 118 Times in 104 Posts
    There is no reason why it should not move the dish and then record the channel.

    Have you tested a few things. Is the channel you want to record working if you select it.

    Have you tried moving your dish in advance to 1°w then setting up a timer of the channel you want to record. Just do a test - set a timing for say the next five minutes and see what happens.

  3. #3

    Title
    Member
    Join Date
    Apr 2013
    Posts
    85
    Thanks
    3
    Thanked 3 Times in 3 Posts
    Quote Originally Posted by timofee View Post
    There is no reason why it should not move the dish and then record the channel.
    Have you tested a few things. Is the channel you want to record working if you select it.
    Have you tried moving your dish in advance to 1°w then setting up a timer of the channel you want to record. Just do a test - set a timing for say the next five minutes and see what happens.

    I have tested putting the timer with EPG at 1 ° w then moved the dish to 13 ° E and waited a while when it's time for recording the VFD
    flash "recording" but the dish does not move.
    Last edited by knislinge2000; 31-07-17 at 14:41.

  4. #4
    bellejt's Avatar
    Title
    Forum Supporter
    Donated Member
    Join Date
    Dec 2013
    Posts
    1,862
    Thanks
    64
    Thanked 344 Times in 299 Posts
    if you are watching a channel on one other sat it is normal the dish does not move if you do not give priotity to recordings.
    VU+ DUO2 quad tuner with HDD 1 TB + Latest Openvix and VU+ DUO2 FB tuner + Octagon SF8008 FB tuner
    Triax 88 cm rotor single LNB 30 E- 40 W
    1 Gibertini 1.00 m fixed - 3 quad LNB 19E-23.5E-28.2E

  5. #5

    Title
    Member
    Join Date
    Apr 2013
    Posts
    85
    Thanks
    3
    Thanked 3 Times in 3 Posts
    Quote Originally Posted by bellejt View Post
    if you are watching a channel on one other sat it is normal the dish does not move if you do not give priotity to recordings.
    But my solo2 move the dish if i am on an other satellit .
    How do i give priotity to recordings?
    Something i missed?

  6. #6
    bellejt's Avatar
    Title
    Forum Supporter
    Donated Member
    Join Date
    Dec 2013
    Posts
    1,862
    Thanks
    64
    Thanked 344 Times in 299 Posts
    settings - recordings +++++ - priority recording
    VU+ DUO2 quad tuner with HDD 1 TB + Latest Openvix and VU+ DUO2 FB tuner + Octagon SF8008 FB tuner
    Triax 88 cm rotor single LNB 30 E- 40 W
    1 Gibertini 1.00 m fixed - 3 quad LNB 19E-23.5E-28.2E

  7. #7

    Title
    Member
    Join Date
    Apr 2013
    Posts
    85
    Thanks
    3
    Thanked 3 Times in 3 Posts
    That setting was already done!
    I tested going to openvix-4.2.030.release same as I have on my VU + Solo2
    without success

    Start getting sick and tired of Duo2
    Think I sell it and keep my solo2

  8. #8
    bellejt's Avatar
    Title
    Forum Supporter
    Donated Member
    Join Date
    Dec 2013
    Posts
    1,862
    Thanks
    64
    Thanked 344 Times in 299 Posts
    maybe take the time to compare settings for recording and tunersettings for recording between both boxes. If it works on solo2 it should be working on duo2 as well.Image is the same.

  9. #9

    Title
    Member
    Join Date
    Apr 2013
    Posts
    85
    Thanks
    3
    Thanked 3 Times in 3 Posts
    Quote Originally Posted by bellejt View Post
    maybe take the time to compare settings for recording and tunersettings for recording between both boxes. If it works on solo2 it should be working on duo2 as well.Image is the same.
    All settings are the same i soon get crazy

  10. #10

    Title
    Member
    Join Date
    Apr 2013
    Posts
    85
    Thanks
    3
    Thanked 3 Times in 3 Posts
    Quote Originally Posted by knislinge2000 View Post
    All settings are the same i soon get crazy
    Help with this problem would be amazing

  11. #11

    Title
    Senior Member
    Join Date
    Dec 2012
    Posts
    194
    Thanks
    130
    Thanked 37 Times in 21 Posts
    take a backup of the settings on the solo2 and transfer it and restore it on the Duo2

  12. #12

    Title
    Member
    Join Date
    Apr 2013
    Posts
    85
    Thanks
    3
    Thanked 3 Times in 3 Posts
    Quote Originally Posted by Alankellyeire View Post
    take a backup of the settings on the solo2 and transfer it and restore it on the Duo2

    Do not really know how to do it.
    Is it possible to have the same settings in duo + as in solo2

  13. #13

    Title
    Senior Member
    Join Date
    Jan 2014
    Posts
    589
    Thanks
    56
    Thanked 118 Times in 104 Posts
    What happens if the channel you are trying to record is on the same satellite as the channel currently being received by the Duo2.

  14. #14

    Title
    Member
    Join Date
    Apr 2013
    Posts
    85
    Thanks
    3
    Thanked 3 Times in 3 Posts
    Have tried to record a channel on the same satellite while I was on another channel on the same satellite and the receiver does NOT change channel

  15. #15
    bellejt's Avatar
    Title
    Forum Supporter
    Donated Member
    Join Date
    Dec 2013
    Posts
    1,862
    Thanks
    64
    Thanked 344 Times in 299 Posts
    if you are recording why would the box change channel ? If you are watching and recording on same satelite and same transponder it should work fine.Differant transponders is a problem if you have only one cable attached.With rotor you can only record from one sat at the time.
    VU+ DUO2 quad tuner with HDD 1 TB + Latest Openvix and VU+ DUO2 FB tuner + Octagon SF8008 FB tuner
    Triax 88 cm rotor single LNB 30 E- 40 W
    1 Gibertini 1.00 m fixed - 3 quad LNB 19E-23.5E-28.2E

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.