latest = what please?
Please say the number to avoid ambiguity
And are you able to change options?
latest = what please?
Please say the number to avoid ambiguity
And are you able to change options?
14 latest update from openvix What settings need to be changed?
There could be options in the "front display panel" menu. I don't have the receiver, so I may be mistaken.
No options for changing the number of characters to display, just brightness etc
abu baniaz (17-06-17)
Same here, just flashed to 5.0.014 as mine would not update from 5.0.007, so clean install, and I have no fix for the display either. There is nothing new in the front display panel settings.
Back to 007 we go again
I'll test and report back to Edision.
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
abu baniaz (19-05-17),gadget-man (19-05-17),gilvey (19-05-17)
Still no front display fix in 016
What is the Display bug anyway?
----------------------------------------------------------------------------------------------------------------------------------------------------------------
Edision OS Mega
TUNER A: - Stab HH-90Motor, Inverto Black LNB, Cheapo Lidl 80cm Supermarket Dish, 15W to 42E
TUNER B: - (Nothing Connected) Will be used a 2nd Cable from Motor
TUNER C: - Fixed 28.2E (on Sky Q Hybrid LNB)
Sky Q and 2 Mini's
Lots of Old Dead Equipment...
Half the display isn't working, half the channel name is missing
DrProzac (29-05-17)
Ahh Ok Cool thanks.
I've only just bought the box, so wasn't sure. Thought it probably was that, but was 100% sure.
----------------------------------------------------------------------------------------------------------------------------------------------------------------
Edision OS Mega
TUNER A: - Stab HH-90Motor, Inverto Black LNB, Cheapo Lidl 80cm Supermarket Dish, 15W to 42E
TUNER B: - (Nothing Connected) Will be used a 2nd Cable from Motor
TUNER C: - Fixed 28.2E (on Sky Q Hybrid LNB)
Sky Q and 2 Mini's
Lots of Old Dead Equipment...
Installed 007 that's sorted the front display
I just set up a new Mega i bought this week and was surprised to find that the display when in standby shows the date and only first 2 digits of the time, very odd.
Have also updated the box with all available updates but not different.
Hopefully as posted its something that will soon be resolved as its something visible all the time in the living room and with the 12 digits available you'd think it would be default to have them all used.
Its a driver related issue.
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
Front panel still not fixed in latest openvix 5.0.017 (Release)
abu baniaz (17-06-17)
Can someone try last night's OpenATV image please?