Try restoring the position setup in OSD settings to default.
Also try changing the TV's aspect ratio to 'Just scale' or 'Just Scan', if you have the option.
Sent from my iPhone using Tapatalk
Try restoring the position setup in OSD settings to default.
Also try changing the TV's aspect ratio to 'Just scale' or 'Just Scan', if you have the option.
Sent from my iPhone using Tapatalk
Ok i reset the position settings to default and it worked the mini tv in the epg etc was back to normal, so I then put the position settings back to how I have them (to fit the screen of my tv) and the problem returned, mini tv in epg etc zoomed in? As I've already said this isn't a issue in 016 this is only happening Since 018.
I found ages ago that position setup "Move Left/Right" set to 16 caused me problems, but 15 is ok.
Last edited by ccs; 08-12-16 at 20:42.
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
I've got a Samsung 50' smart TV I presume the equivalent to 'just scan' would be screen fit on my TV? No I do not have it on screen fit it's set to 16:9 like it always has been and like it always has been using openvix, I can't see how a setting on my tv would cause this, surely it would affect the actual picture when watching something and not just the picture in graphic? again like I said my setup and settings have been fine all this time and I've only had this issue since 018 as have others on this thread so make of this what you will.
You need to use the Screen Fit option on your Samsung and forget the OSD positioner, that is a very last resort. The OSD positioner is for TV's that are ancient, so please don't tarnish your setup by having that crap when its not needed.
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
I will give this a try Andy and report back I just don't understand how this wasn't an issue before 018?
Maybe a driver issue, but the Screen Fit will correct everything for you, just remember to go back to default for the OSD positioner.
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
Only problem I have with setting my Samsung to screen fit and my Sony to full pixel is some of the picture on some sd channels gets cut off around the edges, in that I mean I get a black border around the edge of the screen and the picture doesn't fill the whole screen.
Last edited by No1gooner; 08-12-16 at 21:50.
You must have Automatic Resolution enabled in AV Settings?
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
No it's disabled Andy? It's a very slight black border and is more noticeable on some sd channels (particularly bbc1 sd) then others, some sd channels fill the whole screen fine.
Last edited by No1gooner; 08-12-16 at 22:08.
You definitely reset (defaulted) your OSD Positioner settings? I have a Panny Plasma, Sony LED and LG OLED 4K TV's and all with the Overscan feature turned off and SD & HD picture are as they should be.
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K