D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
Here you go >> enigma2-plugin-skins-openvix-iskin-dark.rar
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
kryton (18-10-16)
Once again only builds 4.1 008 (not tried 009) and below appear to work correctly (no vertical lines) except for build 003 where the LAN connection doesnt work and 4.1 001 being the most stable.
So if my problem is with builds 4.1 010 to 016 and builds 4.2 then surely this is no coincidence?
So if you keep on insisting its not the drivers...and its not my tv then its an image fault? (obviously not as openPLI does the same) or then it must be a faulty box? In which case it should be returned to the sponsor?
As the box is only 10 months old.
Last edited by kryton; 18-10-16 at 08:10.
If builds 4.1.010 are ok then it's not a hardware fault.
Sent from my iPhone using Tapatalk
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
Thats what im trying to tell you, builds 4.1 010 to 016 have the same vertical line issue, as do the series of 4.2 builds all containing the same driver...the same goes for openPLI.
As these problems only occur with these builds all containing the updated driver surely that says something?
Ive ruled out image and hardware faults myself.
Have you tested OpenAtv?
Sent from my iPhone using Tapatalk
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
To be honest mate i havnt, ive flashed my box that many times in the last 2 weeks its getting a bit tedious.
But all facts seem to point at the driver if your saying it was updated in 4.1 010 and above as only these builds show the vertical line problem.
OpenPLI is exactly the same so an image fault should be ruled out.
Ive flashed 4.1 008 , 004 , 003 , 001 and these all work fine as do builds 3.2.
Last edited by kryton; 18-10-16 at 08:23.
And I repeat: there's nothing in the image that does anything at all with PQ; it's only driver related.
Help asked via PM will be ignored.
The forum is there for help and all will benefit from your questions.
NO CARD SHARING TALK WILL BE TOLERATED, LAN OR WAN, IN OPEN FORUM OR PM !
English is not my native tongue.
I apologise for all my grammar, spelling and idiom errors.
I really have no idea. Only thing I could imagine is different TV settings (or Amp, if one is in the line). e.g. video-'enhancers' enabled. Or the plugin 'video enhancement'.
Help asked via PM will be ignored.
The forum is there for help and all will benefit from your questions.
NO CARD SHARING TALK WILL BE TOLERATED, LAN OR WAN, IN OPEN FORUM OR PM !
English is not my native tongue.
I apologise for all my grammar, spelling and idiom errors.
Yeah ive tried the video enhancement plugin mate and the script that was posted by Abu (made by aido) these both solve the problem but you have to either run the script or mess with the plugin each time the box comes out of standby....which in itself gets tedious to lol. Tried adding the script to a cron timer but it doesnt have the desired effect.
Also playing with the tv settings on 2 tv's makes no difference.
I really apologise for going over old ground but im just trying to find out why a box only ten months old is now displaying vertical lines on the latest builds from the OE-A
If it cant be updated then eventually it will become redundant.
Last edited by kryton; 18-10-16 at 09:07.
Cheers Andy but its a no go.
In not so many words....collected errors
Cannot install openvix-iskin-dark.......
4.2git682+913a0bd due to incompatible architecture.....
Im no scientist but i guess thats telling me its not compatible with 4.1
Thanks for the upload tho.
Appreciated mate.
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
kryton (19-10-16)