Set 16:9 to be Letterbox and 4:3 to be Pillarbox. I always set mode to 1080i and refresh mode to Multi.
Sent from my iPhone using Tapatalk
Set 16:9 to be Letterbox and 4:3 to be Pillarbox. I always set mode to 1080i and refresh mode to Multi.
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
champs4life (09-10-16)
Sorry I missed what has been covered in the list few pages. I know this is stating the obvious, but have you played with the picture size (p.size) button on the remote towards the bottom of the remote (on mine).
Vix image (usually latest) - VU Solo 4K- WD 1TB INTERNAL HDD - DVB-T Freeview, trialling IPTV options
If my response has helped you, don't forget to hit the thanks button below. I appreciate you appreciate me
champs4life (09-10-16)
This might work to factory reset the tv .....
Code:1. With the TV on, press and hold EXIT on the TV remote for 10 seconds. 2. The Factory Reset screen appears displaying a warning message. Understand that all your settings revert to factory settings if you run the Factory Reset function. Note: When the Factory Reset screen appears, Cancel is initially highlighted. If you want to cancel the Factory Reset function, press ENTER now. Otherwise, go to Step 3. 3. Press the ◀ to highlight OK, and then press ENTER. After the TV completes the Factory Reset, it powers itself off. When you power the TV on for the first time after the Factory Reset, the Plug & Play screen appears just as if you had turned the TV on for the first time.
champs4life (09-10-16)
duoduo (10-10-16)
Yes I have tried this method today but unfortunealy nothing happens.
I dont understand how they can't be a factory reset option. Its not a 10 year old TV.
I am stressed all the time, but this TV/Box problems has taken its toll on me.
I cant turn overscan off at all. I cant even factory reset my TV. What an utterly crap TV I have.
"Screen fit" is the correct scaling option on your tv as Samsung advised you. You probably have some settings messed up on the stb as well. On the satellite receiver go to Menu->Setup->System->User Interface->Position Setup and report back with the values there. They should be left as default.
Zgemma H7S running OpenVIX 6.2, Darkmotor, Triax TD110 dish, Inverto Black Ultra dual lnb
LG 50UM7450 4K TV, Pioneer VSX-534 Atmos AVR , Panasonic UB820 region free 4K Bluray & a PS4.
champs4life (10-10-16)
have you tried it as like mine?
Can you set the screen position settings to default and leave them there. If you set the screen setting on the tv to "screen fit" then overscan is off. What is your actual problem then??? Worrying about 4:3 and 16:9 is only confusing things - if you want to fill the stretch a 4:3 picture to fill the screen then use "just scale". This is absolutely nothing to do with overscan and should be ignored for the moment until you sort the original problem. Also make sure auto resolution is turned off (in the receiver a/v setup). Try uploading a picture of the problem as very little of what you are telling us is making sense.
Zgemma H7S running OpenVIX 6.2, Darkmotor, Triax TD110 dish, Inverto Black Ultra dual lnb
LG 50UM7450 4K TV, Pioneer VSX-534 Atmos AVR , Panasonic UB820 region free 4K Bluray & a PS4.
kryton (10-10-16)
I dont understand what is confusing about my problems.
I have had numerous problems which I have explained to the best of my ability what else do you want from me?
If you read what I wrote originally. Yes I can change to screen fit but overscan is only TEMPORARILY off. As if I reboot box or turn TV of it goes back to 16:9 in the screen settings thus making overscan come back on again.
the whole just scale, pillarbox, letterbox settings in regards to 4:3 and 16:9 is seperate issue and I know it hasnt got anything to do with overscan.
Problem is I CANT turn overscan off permanently. I CANT factory reset my TV.
I dont understand what I have said that doesnt make sense.
Please do not stress me out more. I have already had enough of that.