Hi
sorry to bother people but how do i know what version of Vix i have on my Duo? and is it updated automatically by internet or do i have to manually do it?
cheers all
Hi
sorry to bother people but how do i know what version of Vix i have on my Duo? and is it updated automatically by internet or do i have to manually do it?
cheers all
Menu - information - about.
No it is not updated automatically, you will however be notified with a green flashing orb in the info bar when a update is available unless you disable that feature. The choice wether to update or not will always reside with you.
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
frank machin (12-09-16)
20160912_170730.jpg20160912_170742.jpg
Cheers mate....this is what the about screens show Larry G.. i looked at the software updater too and that just said ''error contact W.O.S. if it persists''
See this thread, has screenshots.
http://www.world-of-satellite.com/sh...upport-Section
Your image version is 3.2
The build number is 037
frank machin (12-09-16)
frank machin (12-09-16)
so i need to install this.................. openvix-4.2.005.release-vuduo2_usb via USB?
sorry about the idiotic questions chaps. i am trying to learn this stuff..so i do not need to ask in the future
this is what i intend to do
Preparation.
1. Format a USB stick to FAT32.
2. Download the image of your choice and extract it to your desktop.
3. Open the folder you extracted to your desktop, in this case named openvix-
3.0.xxxvuduo2_usb, you will see another folder named vuplus, this is your image file. Copy
the entire vuplus folder directly to the USB stick.
Flashing the Receiver.
– Fully power the receiver down via the rocker switch at the rear of the receiver.
– Make sure no USB devices are plugged into the receiver at this point.
– Insert the USB stick containing the image files into one of the USB ports on the receiver.
– Power the receiver on from the rear rocker switch and await instructions.
– As your Duo2 starts to power up you should see a prompt on the receivers display asking
you to press the power button, at this point you need to press the power button which is
located behind the flap on the front of the receiver.
Last edited by frank machin; 12-09-16 at 17:29.
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
frank machin (12-09-16)
Thanks Larry...is there much of a difference between 3.2 and 4.0? will i notice anything it?
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
frank machin (12-09-16)
last question hopefully can you point me to a link about how to backup the image please
cheers
Blue button - ViX - image manager (this makes a full image backup) backup manager makes a settings and plugins backup. Make sure you save the backup to a internal hard disc or a USB storage device before you reflash so you don't loose it.
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
Hi Larry
i installed the new vix using image manager..but now i have no sky channels what has gone wrong?
There are no channels on the image by default.
Setup ABM. This will create the bouquets very similar to Sky. See this post
http://www.world-of-satellite.com/sh...l=1#post416650
Install the softcam/emulator
Transfer the config file to read your card
Start/enable autostart for the softcam/emulator
.... oh dear.