Hi everyone
I have just got a Miraclebox and set it up without any problems.
The only thing is that the epg is all over the place, does anyone know how to put it into alpherbetical order or all sport channels together, films together etc
Regards
Rob
What image & version number is on it?
Try Menu -> Setup -> Service searching -> Autobouquets Maker.
Hi
Thanks for your quick reply
All I know is it's openvix latest addition - anywhere I can find out more info.
I tried what you suggested all I can see is add provider prefix to bouquets - is set at no
Regards
Rob
The video guides here might help you.
http://www.openvix.co.uk/index.php/g.../video-guides/
You say EPG, do you mean your channel list? EPG is your 7 day tv guide.Originally Posted by Toprob
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
Hi
I cant get a channel list although I think I did earlier before trying to sort out the 7 day guide
Regards
Rob
As you can probably tell I'm bit of a novice at this
Its ok, we all have to start somewhere. For your channels use ViXs ABM. To find this press Menu > Setup > Service Searching > ABM (AutoBouquetsMaker).
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
Hi
Just done this
set configure to simple
providers freesat and sky
Start scan and get nothing happen - just timeout for tuner lock message
Regards
Rob
When I press start scan I get tuning freesat services - 0 video 0 radio with the progress bar about a quarter of the way across at the bottom, then a popup appears saying timeout for tuner lock
How many tuners do you have on your receiver?
DO they all have wires from the satellite dish/LNB?
Are the wires direct to LNB or do they have switches/splitters etc in between?
For each tuner, please say what you have configured it as . Separate answer for each tuner please.
Hi
Twin tuner but only one cable so far
Just ran a scan and got over 900 channels , picture excellent , have now re found channel list but that along with the epg is in no kind of order
Regards
Rob
Don't know if this is the problem but when I press the epg button the only options I get are favourites and last scanned , not freesat uk
What is the tuner configuration for the tuner that has no wire connected to it?
The same as tuner 1
single
28.2E Astra 2E/2F/2G
Posting Permissions
Reply With Quote