Hiya,
Can you post a screenshot of your Unicable LNB settings please? I have the same dish/LNB/receiver and not sure what the settings should be!
Cheers!
Hiya,
Can you post a screenshot of your Unicable LNB settings please? I have the same dish/LNB/receiver and not sure what the settings should be!
Cheers!
Ah, think I have figured it out. Had to configure each tuner and change the SCR on each one to a different number :-)
Hi Sorry only just seen this now. Everything up n running ok? Are you on the latest ViX?
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
Yeah, once I set the make and model of the LNB, then I could select SCR past 4.
Tried 4 recordings and watched another and worked fine. Didn't bother trying to go to 7 different ones!
Have my motorised on Tuner B.
Yes, running latest Vix. All seems fine :-)
Cracking receiver this one!
Do us a favour in service searching you should have solo4K misc control panel? Enable both toneburst n power lnb.
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
Its a requirement with our Unicable II LNB we have. Can you also finish setting up rest of the tuners so you have 7x SCRs and finally can you go into each tuner config and where it says "connect to" can you connect tuner c to a, tuner d to c, tuner e to d etc etc.
Sent from my iPhone using Tapatalk
Last edited by Andy_Hazza; 30-04-16 at 16:20.
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
I seem to be getting some tune failed messages tonight.
Do they need priority setting?
I have tuner A configured as Unicable and not connected. Then B is motorised. C is connected to A, D to C, E to D etc etc. And they are SCR 1 thru 7
Toneburst and LNB power are enabled.
Anything else that I have missed?
I seem to remember reading somewhere that the root tuner needs to be kept alive all the time, but there was a bug that prevented it? It may be something that was fixed though.
Aup. I have noticed some tune fails have crept back in again. I'm gonna do some testing myself n will speak to Rowland about this.
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
psykix (11-05-16)
i have a Unicable II LNB
but I can not find
service searching
solo4K misc control panel?
we don't have that plugin in, its integrated into the "customise" section in system.
Vu Ultimo4K, OpenViX 5.0, 8xdvb-c, 8xdvb-s2, 2xdvb-t2
Vu Solo4K, OpenViX 5.0, 8xdvb-s2
Dreambox DM900, OpenViX 5.0, 2xdvb-s2, 2xdvb-c/t2
Terrestrial, Cable, Fixed 28.2e + Unicable2 LNB
Sicilian (06-09-16)
thanks rossi2000 that was doing my head in I think I sorted it now