Peter has continued the marvellous work on ABM so that we can now use ABM for HD Terrestrial channels. However, there is a slight snag, the details are not available on the stream automatically. We need users to provide stream IDs. After that we can add to ABM and it should be fine.
Please use the attached plugin which has a script by Huevos to obtain the relevant data.
You can find your mast from this site by Brian Butterworth:
Check the website above and find out your mast details. We need to know where your aerial is pointing to. This is not necessarily the nearest one.Code:https://ukfree.tv/maps/alphabetical
Copy/save the link to your mast. You will have to post this later.
1. Make a settings backup so that you can restore it after testing.
Blue Button > Vix > Backup Manager > Green Button (New Backup)
See following thread if you need further details:
https://www.world-of-satellite.com/s...-and-Restores/
2. We need to ensure you start from "zero", so you must delete the existing terrestrial services.
Press channel up > Green (satellites), highlight "Terrestrial - Services" > Menu > Remove terrestrial services > OK to confirm > Restart
3. Install the attached plugin. (Transfer to /tmp. Blue > Vix > Install local extension)
4. Install the Terrestrial scan plugin.
Menu > Green (download plugins) > Scroll to "System plugins" > OK to expand > Scroll to "terrestrialscan" > OK to install > Confirm the installation
5. Scan using the terrestrial scan plugin
Menu > Setup > Tuner config / service searching > Terrestrial scan > Leave as default > Green to scan
6. Restart the receiver using your remote. Check services on different muxes are working fine
7. Run the plugin "ABM UK T2 xml Creator". It will create a file called "terrestrial_Custom_transponder.xml_xxxx.zip" in /tmp/
This will also add your lamedb filles in the zip file.
8. Save the file to your PC and attach to your post
9. Please also post a link to your mast on the UKfree website. This makes it easier to compare.
10. You can remove the "abmt2xmlmaker" plugin afterwards
Logs for the the following transmitters are required. The ones that have been done will be moved to post 2.
key="angus______________" Angus
key="beacon_hill________" Beacon Hill
key="bilsdale___________" Bilsdale
key="blaenplwyf_________" Blaenplwyf
key="bressay____________" Bressay
key="bromsgrove_________" Bromsgrove
key="brougher_mountain__" Brougher Mountain
key="caldbeck_scot______" Caldbeck_scot
key="chatton____________" Chatton
key="darvel_____________" Darvel
key="douglas_iom________" Douglas_IOM
key="eitshal____________" Eitshal
key="fremont_point______" Fremont Point
key="hannington_________" Hannington
key="hastings___________" Hastings
key="hemel_hempstead____" Hemel Hempstead
key="huntshaw_cross_____" Huntshaw Cross
key="keelylang_hill_____" Keelylang Hill
key="knockmore__________" Knockmore
key="lark_stoke_________" Lark Stoke
key="limavady___________" Limavady
key="llanddona__________" Llanddona
key="long_mountain______" Long Mountain
key="midhurst___________" Midhurst
key="moel_y_parc________" Moel y Parc
key="nottingham_________" Nottingham
key="presely____________" Presely
key="redruth____________" Redruth
key="rosemarkie_________" Rosemarkie
key="rumster_forest_____" Rumster Forest
key="selkirk____________" Selkirk
key="sheffield__________" Sheffield
key="skriaig____________" Skriaig
key="tacolneston________" Tacolneston
key="torosay____________" Torosay
key="tunbridge_wells____" Tunbridge Wells
key="wenvoe_____________" Wenvoe
key="whitehawk_hill_____" Whitehawk Hill
We'll try to list the areas that are already done in the second post. As it may not be up to date, the definitive file is here
Code:https://github.com/oe-alliance/AutoBouquetsMaker/tree/master/AutoBouquetsMaker/providers
Please start your own thread.
If you perform a manual scan first, a subsequent run of ABM will use the details in lamedb file even if details have not been added to ABM.
Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Originally Posted by keith1200rs
