Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Results 1 to 4 of 4

Thread: Harmony 650 and ET 9000

  1. #1

    Title
    Senior Member
    Join Date
    Oct 2011
    Posts
    521
    Thanks
    376
    Thanked 98 Times in 58 Posts

    Harmony 650 and ET 9000

    Hello All,

    Is there a button on the remote for Filelist? Or do I have to set up a shortcut on the RC? Also, any activity based things that I should setup - any advice greatly welcomed?

    How is it on batteries, should I invest in rechargables or are Duracell (other makes available) good to last in there?

    Thanks,

    FP

  2. #2

    Title
    Senior Member
    Join Date
    Oct 2011
    Posts
    521
    Thanks
    376
    Thanked 98 Times in 58 Posts
    Just had a look through the instrcutions, and maybe I am missing this, but I cant see how to assign a key to something. On the actual control there is no key for TV, so you can press it, and get up the TV boquet menu? Can this be done??

    Or is there a long press of another button that will bring it up?

    I know I can access by going into the menu - but that may be longer winded.
    Ta,

  3. #3
    Bazzer's Avatar
    Title
    Forum Supporter
    Donated Member
    Join Date
    Jun 2014
    Location
    Nottingham
    Posts
    670
    Thanks
    480
    Thanked 156 Times in 118 Posts
    have you been on the website for the harmony 650 and programme it that way. https://support.myharmony.com/en-gb/...ort%20homepage . Have a look here
    Mutant HD2400 , 2 x DVB-S/S2, 2x DVB-T/T2/C ,OpenVix version 5.1.0028 , Simple Ten Eighty skin , and Tosh picons , remote Harmony 650, Amazon firestick

  4. #4

    Title
    Forum Supporter
    Donated Member
    Join Date
    May 2011
    Posts
    307
    Thanks
    892
    Thanked 142 Times in 100 Posts
    Flyingpig

    This is an activity-based remote and they can seem daunting to set up for the first time.

    First off, add all of the devices that you want to control. The 650 used to be restricted to 5 devices but has now been extended to 8 devices. The Logitech database is pretty comprehensive with only a few obscure devices missing. Don't worry about the odd missing button here or there - you can go back and address that later.

    Next, you will need to define your activities. Say, watch tv, watch a dvd, listen to music. Or you can set up your own custom activity. So, in one of my rooms, I have a TV, sat box and AV amp. Since we only ever watch satellite channels, I just call that activity "Watch TV". You are then guided through the process of how your devices are operated when you press the watch tv button. IE, turn on tv and set it to the correct HDMI port, switch on the sat box, and finally switch on the AV receiver and set that to the correct input. You will also teach the remote what device is changed for things like volume. For me that means that the av receiver volume should be changed, and not the tv or sat box.

    When you are in one of those activities, you can add some custom buttons that will appear in the small screen and you can map these to any buttons from your Xtrend remote. I added buttons for "Planner" (for your recordings), "Bouquet List" which is the same as the TV button on the original remote. I also added buttons for Subtitles and Audio. Those buttons will appear in the screen while you continue to use that particular activity. Also, whilst in an activity, there is a label at the bottom of the screen called devices and when you hit the button adjacent to that, you can select an individual device and control that separately.

    Stick with it mate because you will soon start to find your way around. And if you do mess up, you can easily go back and alter any of the settings that are not to your liking afterwards.

    So far as batteries are concerned, I wouldn't worry about rechargeable ones. It is like a lot of things and will depend how much use it gets but for me, even ones that are heavily used are fine for a few months. Oh - you can alter the backlight timeout to further increase battery life if you want.

    Hope that helps.

  5. The Following User Says Thank You to Clabs For This Useful Post:

    Flyingpig (25-11-15)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.