Help on cccam and oscam pls.

[lorlor]

Dude honestly.... I had to take a 44 tonne truck out today coz a driver didn't turn in, Most people are not on the end of a device all day long just to provide support, I spent most of Saturday trying to sort my own s**t out, when I am available if I can answer a question I will, but that is certainly never whilst driving an HGV through busy streets and villages.
As it is when you get into oscam webif you need to change the timeout in global config, if you are accessing your local cable card set it to 8000ms, i personally have mine set to 10000ms.
If it is sat you will need much lower values but that all depends on what card you have.

At the moment l cant access webif,l think my setting is wrong somewhere.

[judge]

At the moment l cant access webif,l think my setting is wrong somewhere.

If you can't access oscam webif, it's either nor running - check blue button -> Softcam Manager, or you're using the wrong port - check /etc/tuxbox/config/oscam.conf - httpport for correct port to use.

[lorlor]

OK make sure there is a [webif] section in oscam.conf. If there isn't then add these lines

[webif]
httpport = 8888
httprefresh = 5
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
httpforcesslv3 = 1
httppollrefresh = 10

Not working but saying......... This webpage is not available.

[abu baniaz]

what address are you inputting into your web browser?

[lorlor]

OK make sure there is a [webif] section in oscam.conf. If there isn't then add these lines

[webif]
httpport = 8888
httprefresh = 5
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
httpforcesslv3 = 1
httppollrefresh = 10

This my webif settings

[webif]
httpport = 8888
httpuser =
httppwd =
httprefresh = 10
httpallowed = 127.0.0.1,10.0.0.0-10.255.255.255,172.16.0.0-172.31.255.255,192.168.0.0-192.168.255.255
aulow = 120
hideclient_to = 15

[judge]

Not working but saying......... This webpage is not available.

Network issue so. What IP are you trying to connect from?

[DaMacFunkin]

I think you need to simplify that webif, do you connect directly to your modem or do you have a seperate router?

[lorlor]

Network issue so. What IP are you trying to connect from?

Box IP,i see on network information.

[lorlor]

I think you need to simplify that webif, do you connect directly to your modem or do you have a seperate router?

I connect directly to my router.

[tappari]

Not working but saying......... This webpage is not available.

This can also mean that your oscam is not running in the box.

[lorlor]

Is running but freezing and stand still.

[lorlor]

Can l paste my webif setting?.

[tappari]

Is running but freezing and stand still.

What kind of setting do you have in Oscam Info? Blue button -> OScam Info -> Setup

[tappari]

oscaminfo.jpgMy setup:

[lorlor]

oscaminfo.jpgMy setup:

Reader user data from oscam.conf..........yes
Automatically update client/server view......yes
update interval (in seconds)......................5