Problem receiving channels.

[Mr. Mister]

I used the same cable from my XPEED to my Miraclebox and there was no change in the XB but the Miracle box has lost all control.

I would flash it again.. and set up from scratrch..

[Spangles]

[quote name="Mr. Mister" post=381930]I would flash it again.. and set up from scratrch..[/QUOTE]





I did set it up from the beginnig, nothing has changed, all the main channels are dead or don't accept.



I don't know what....

[Spangles]

I don't' know what happened to that last reply.

I did try starting from the beginning, using the latest flash downloaded from Vix. The same results happened. I can't think of a reason why some channels would be clear and then go blank or why my LX2 would receive all channels no problem.

Thanks for your help.

[Spangles]

I managed to get it working but it's a mystery. I have an LX2 in another room but the Miraclebox will only work if the LX2 is turned off completely. This is not a problem vice versa. Also it will only get a signal with a long coax cable and not a short one

PS can an admin edit that post above please so it doesn't look like I've been on something. I'm sure it wasn't me that posted it in that state.

Thanks again for your replies guys.