Can I program the VU+ Duo 2 remote to turn off my TV? I'm looking for the instructions please.
Can I program the VU+ Duo 2 remote to turn off my TV? I'm looking for the instructions please.
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
LG : LG 40UF770V40
Ive tried the HDMI CEC setup but could never get it to work.
Thanks
Can you post your HDMI CEC settings from your box ?
Mutant HD2400 , 2 x DVB-S/S2, 2x DVB-T/T2/C ,OpenVix version 5.1.0028 , Simple Ten Eighty skin , and Tosh picons , remote Harmony 650, Amazon firestick
Here
Attachment 44321
First things first, make sure the Volume on the Vu+ remote is set to 100% beforehand. Press 1 & 3 simultaneously on your Vu+ remote until the TV button illuminates. Then enter the TV code, in your case it is 1628 (LG TV Code). Then hold down the mute button on the Vu+ remote whilst pointing at the TV until the TV mutes. When it mutes, now press the +/- volume buttons and the volume should work. Once done exit out the mode by pressing the ok & stop button (recording stop button). You now have a paired TV remote.
Sent from my iPhone using Tapatalk
Last edited by Andy_Hazza; 21-08-15 at 15:02.
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
Ashley69 (21-08-15)
Your HDMI-CEC settings should be;
Enabled - YES
Put TV in standby - NO
Wakeup TV from standby - YES
Regard deep standby as standby - NO
Switch TV to correct input - YES
Use TV remote control - YES
Handle standby from TV - YES
Handle wakeup from TV - YES
Wakeup signal from TV - STREAM REQUEST
Forward volume keys - NO
Put your Vu+ into standby - YES
Wakeup your Vu+ from standby -YES
Minimum send interval - DISABLED
Then green button to save settings. Now you will have a proper working remote where you press the STB this turns your Vu+ receiver off and pressing the TV turns your TV off. And to turn your TV on just press TV on the remote etc.
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
Thanks Andy.
Had to go back to work. Will try when I return.
Octagon SF8008 4K, VU+Duo 2..
Edision OS MINI,
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
Blu-ray (21-08-15)
Nice, thanks for the quick reply.
Sent from my iPad using Tapatalk
Andy_Hazza (21-08-15)
Ok. Great instructions from Andy. VU remote now turns tv off with tv button.
HDMI CEC still no joy with these settings. Tried different cables as well.
Octagon SF8008 4K, VU+Duo 2..
Edision OS MINI,
Andy_Hazza (21-08-15)
Did you try restarting your receiver?
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
Hi Andy, do you have the code for panacronic TV please?
VU+ DUO2 Always Current Vix Build Gibertini 1.2m Motorised