I've got 2x solo 2 boxes both running apollo v147 & today I'm getting the update notification showing in green but when i try to online update to v150 it say the feeds are down for maintenance, is this v150 flash by usb & restore only method.
I've got 2x solo 2 boxes both running apollo v147 & today I'm getting the update notification showing in green but when i try to online update to v150 it say the feeds are down for maintenance, is this v150 flash by usb & restore only method.
Same here, also tried Telenet method but failed to update
Images are updated to 150 but not sure feeds are updated yet so best leave it until tomorrow.
I have managed online update but am using a mutant hd2400.
Vu+ Duo
Vu+ Solo
Gigablue HD 800 SE
All with latest vix image - Autobouquets - SgtFlipflop 28.2e Picons - WebradioFS
I also have problem with TM twin oe .. on update from 147 - 150 via online update just gets stuck on booting had to revert back to 147 lukily saved to usb.
@Antwan, can you try and update by telnet and upload the logs please?
Which skin did you have in use?
init 4 && opkg update && opkg upgrade && init 6
Live update not working for me either on Solo 2
Good to see everyone back
cam
If live update don't work for you, use telnet method, if that don't work reflash.
Sent from my iPhone using Tapatalk
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
error.jpg
Here is my Telenet result
There's an issue with Solo2 feeds again, going to have to trash build and do a complete fresh build, will be 2-3 days before its completed.
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
couch flashing not working for image list is empty but when apollo 150 is flashed normally images list comes back. think there is a change in feeds.
[COLOR="#0000FF"]Octagon sf8008 single/COLOR] 1.5m motorized dish 95E-30W
APPLIANCE (27-02-15)
Hi there ...
got the same error on my solo2 ...
But i'll wait till you tell us to update Or can i flash the image over USB ?Code:root@vusolo2:~# init 4 && opkg update && opkg upgrade && init 6 Downloading http://www.openvix.co.uk/feeds/openvix/Apollo/vusolo2/3rdparty/Packages.gz. wget: server returned error: HTTP/1.1 404 Not Found Downloading http://www.openvix.co.uk/feeds/openvix/Apollo/vusolo2/all/Packages.gz. Inflating http://www.openvix.co.uk/feeds/openvix/Apollo/vusolo2/all/Packages.gz. Updated list of available packages in /var/lib/opkg/openvix-all. Downloading http://www.openvix.co.uk/feeds/openvix/Apollo/vusolo2/mips32el/Packages.gz. Inflating http://www.openvix.co.uk/feeds/openvix/Apollo/vusolo2/mips32el/Packages.gz. Updated list of available packages in /var/lib/opkg/openvix-mips32el. Downloading http://www.openvix.co.uk/feeds/openvix/Apollo/vusolo2/vusolo2/Packages.gz. Inflating http://www.openvix.co.uk/feeds/openvix/Apollo/vusolo2/vusolo2/Packages.gz. Updated list of available packages in /var/lib/opkg/openvix-vusolo2. Downloading http://www.openvix.co.uk/feeds/openvix/Apollo/vusolo2/vusolo2_3rdparty/Packages.gz. wget: server returned error: HTTP/1.1 404 Not Found Collected errors: * opkg_download: Failed to download http://www.openvix.co.uk/feeds/openvix/Apollo/vusolo2/3rdparty/Packages.gz, wget returned 1. * opkg_download: Failed to download http://www.openvix.co.uk/feeds/openvix/Apollo/vusolo2/vusolo2_3rdparty/Packages.gz, wget returned 1.
CU No.Trace
- Vu+ Solo2 - Vu+ Solo SE V2 - Xtrend ET4000@750MHz - all with OpenVIX -
Need to wait for new build 151, building now, hopefully online late tomorrow or Sunday.
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable