Golden Interstar LX3

[rassi]

Am i alone with above issues:

1. Many times when trying to open record listing when recording is on, spinners comes and won´t go a away -> Box stuckd until power cycle or "reboot -f" -f needed otherwise it wont reboot.
2. Jumping with number buttons backwards do not work flawlessly when viewing recordings. Using default OpenViX durations for jumps. No issues when jumping forward.

Using SSD for timeshift and NAS via NFS for recordings.

Results for write throughput:
268.435 Mbit/s with udp,async,wsize=8192
268.435 Mbit/s with udp,async,wsize=32768
268.435 Mbit/s with udp,async,wsize=16384
214.748 Mbit/s with udp,async,wsize=4096

Results for read throughput:
1073.741 Mbit/s with udp,async,rsize=4096
357.913 Mbit/s with udp,async,rsize=8192
 with udp,async,rsize=32768
 with udp,async,rsize=16384

192.168.1.2:/mnt/data/ on /media type nfs (rw,relatime,vers=3,rsize=32768,wsize=32768,namlen=255,soft,nolock,proto=udp,timeo=11,retrans=3,sec=sys,mountaddr=192.168.1.2,mountvers=3,mountproto=udp,local_lock=all,addr=192.168.1.2)

Im really alone with this?

Tested again with fresh install and with NFS and Samba and same thing will happen, it´ll get stuck, spinners spin very often if i even open channel list
when recording, but almost everytime when I open recordins while recording.

Then tested with OpenATV, same setup and no issues at all with NFS.

This is _maybe_ finally solved. Needs more tests tho. I changed OOB skin to Rossi2000´s VixBMC_1080 skin and i think i haven´t seen this issue anymore. At this point I´ll assume skin based issue. Maybe.