openvix image fine but ABM cannot read error, really love this image want it to work for me on cable side.
openvix image fine but ABM cannot read error, really love this image want it to work for me on cable side.
right now im on mips 4.1 lamedb file from etc/enigma2
im also experiencing issues with ABM.. currently using lraizer ab for sly online no issues.
vm is being used without any bouquets you think its worth for me to replace my lamedb file with the above and try again???
Having the same problem too. A manual scan finds the channels so not so sure it's a hardware problem.
Is there anywhere to download bouquets already done? I wish I hadn't updated now as everything was working before.
The problem is usually people using the wrong net ID or having issues locking onto the frequency that ABM is using.
Check the Net ID in the engineers menu of the official receiver. If this cannot be done, get the logs as per post 1 and 2 of the following thread. You can copy and paste the commands in your telnet program http://www.world-of-satellite.com/sh...-area-required
Last edited by Rob van der Does; 28-11-14 at 06:36.
I've uploaded my nit logs to that thread.
abu baniaz (19-11-14)
If you perform a manual scan, do you find the PVR_EPG chanenl?
If so can, you zap to it even if it says chanenl off air. Press Menu > Information > Service > Blue (tuner status)
It should be like the screenshot. Post back the results please.
Can you also post a screenshot of your tuner configuration page please.
Last edited by abu baniaz; 20-11-14 at 04:17. Reason: tuner configuration
screenshot.jpg
screenshot2.jpg
Here are the screen shots.
Your headend is in Gateshead.
As you can see the frequencies used are there in the xml file. I am not sure what the problem is.
Perhaps, use Lraizer's Cable version. It works in a differnt way.Code:<configuration key="40969_dvbc_uk" netid="40969" bouquettype="hd" frequency="571000" symbol_rate="6952000" system="0" fec_inner="3" inversion="2" modulation="3">40969 Gateshead</configuration>
change your modulation to modulation="5"
abu baniaz (20-11-14)
Setting modulation to 5 now gives Timeout For Tuner Lock message.
abu baniaz (20-11-14)
I've ran lraizers autobouqets builder and that has sorted them out nicely. Thanks.
abu baniaz (20-11-14)
please check now
20150122_182349.jpg20150122_182412.jpg20150122_182434.jpg20150122_182503.jpg20150122_182530.jpg
these are taken with lraizers,s ABM-C vix inbuilt gives "cannot read data" when scanning virgin.
Last edited by MK; 23-01-15 at 02:10.
Extract the attached file and place inI have used the frequencies in the lamedb file earlier in the thread. These have been used to create 50 frequencies for you to test on. The first five are using the frequencies in your screenshots, so hopefully you should be in luckCode:/usr/lib/enigma2/python/Plugins/SystemPlugins/AutoBouquetsMaker/providers
When you go into ABM, deselect any pre-existing providers. We are only interesred in fixing your ABM cable issue at the moment. You can re-set them later.
Select "mktest" as your provider and systematically test frequencies one by one.
Enable debug logs prior to testing.
Last edited by abu baniaz; 23-01-15 at 08:33.