I'm in south Yorkshire my net id is 40963
I'm in south Yorkshire my net id is 40963
Lets forget scanning for now. Use bouquets from your other box onto the Venton.
Here's the screens of the other receiver in the ventons location
Screenshot_2014-10-21-22-07-42.jpg
Screenshot_2014-10-21-22-08-15.jpg
Screenshot_2014-10-21-22-08-36.jpg
Use Dreamset/Dreambox edit
Receive files from receiver that has them. Save to PC.
Alternate Dreamset config to use Venton
Send settings to Venton.
YOu will now have excatly same chanenl deatils on both receivers
Thanks
then I suppose if that doesn't work then the tuners must be faulty?
Sorry, but they're not screenshots, screengrabs of screenshots & just as impossible to read as your previous camera ones.
Save the image created & upload those when asked for screenshots.
Makes reading settings a lot easier, saves you typing out every line & saves anyone trying to help having to guess what you might have set.
Sorry only had my phone handy
I've transferred the bouquets across from the working receiver but it just shows 0 signal and nothing on screen
I can only assume these both must be bad as I have now tried both tuners one at a time phisically taking the other one out of the receiver
The DM has an f connector, the Venton have a push connector (belling lee). How are you converting? Can you post a picture please?
I have a f connecter adaptor
its basically the f connector screw with a plug the other side instead of the f plug
but I also have a fly lead as well
Screenshot_2014-10-21-23-16-11_1.jpg
Last edited by reeves1985; 21-10-14 at 23:17.
abu baniaz (21-10-14)
Just a quick update
I have spoken to ththsponser over the phone
who has advised to test using a tv aerial first as that will obviously rule out if the tuners are faulty
I must say cannot fault them for the response and speedy email reply.
abu baniaz (22-10-14)
Another update
been in contact with the sponsor throughout the day
Tried the terrestrial side of the tuner to no avail so going to let the guys test them and hopefully get it sorted
Just a quicky, did you set to scan Virgin Media AND your net id in ABM?
You really shouldn't need to manually or automatically scan for channels, ABM if configured correctly is all you will need, also make sure you don't have sections hidden in ABM.
Yes I tried everything
Neither tuner would scan any terrestrial channels in either
Abm just failed saying cannot read data
Quick update
Received new tuners and all setup and working (except for recording issue)
I think the problem was to do with the tuners I had having dip switches on them
Anyway sponser quickly sorted and I can't say fairer than that
abu baniaz (02-11-14)