Code:
[eDVBLocalTimerHandler] time update to 18:20:59
[eDVBLocalTimerHandler] m_time_difference is 2
[eDVBLocalTimerHandler] set Linux Time
[EPGC] start caching events(1414952461)
sdt update done!
singleRead error (Connection reset by peer)
stop streaming
[eFilePushThreadRecorder] stopping thread.
[eDVBRecordStreamThread] cancelling aio
[eDVBRecordStreamThread] all done
[eDVBRecordFileThread] waiting for aio to complete
[eDVBRecordFileThread] wait: aio_return returned failure: Interrupted system call
[eDVBRecordFileThread] buffer usage histogram (4 buffers of 188 kB)
* * * 1:* * * 6
* * * 2:* * * 9
[eFilePushThreadRecorder] THREAD STOP
thread joined 0
stop streaming
[eDVBCAService] free slot 0 demux 1 for service 1:0:1:3360:C93:3:EB0000:0:0:0:
[eDVBCAService] free service 1:0:1:3360:C93:3:EB0000:0:0:0:
start release channel timer
poll: unhandled POLLERR/HUP/NVAL for fd 24(24)
[EPGC] abort non avail schedule other reading
[EPGC] abort non avail virgin nownext reading
[EPGC] abort non avail virgin schedule reading
[EPGC] abort non avail netmed schedule reading
[EPGC] abort non avail netmed schedule other reading
[EPGC] abort non avail FreeSat schedule_other reading
[EPGC] abort non avail viasat reading
[EPGC] nownext finished(1414952468)
release cached channel (timer timeout)
[eDVBLocalTimerHandler] remove channel 0x224f640
[eEPGCache] remove channel 0x224f640
[EPGC] abort caching events !!
stop release channel timer
close frontend 0
[SoftcamManager] mgcamd.1.35a already running
job Components.Task.Job name=SoftcamCheck #tasks=1 completed with [] in None
[eDVBLocalTimerHandler] diff is -2
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] difference between linux time and RTC time is < 60 sec... so the transponder time looks ok
[eDVBLocalTimerHandler] time update to 18:27:59
[eDVBLocalTimerHandler] m_time_difference is -2
[eDVBLocalTimerHandler] set Linux Time
[SoftcamManager] mgcamd.1.35a already running
job Components.Task.Job name=SoftcamCheck #tasks=1 completed with [] in None
[SoftcamManager] mgcamd.1.35a already running
job Components.Task.Job name=SoftcamCheck #tasks=1 completed with [] in None
[eDVBLocalTimerHandler] diff is 0
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] not changed
[NTP]: setting E2 time: 1414953880.37
set RTC to 2014/11/02 18:44 (rtc_offset = 7200 sec.)
[SoftcamManager] mgcamd.1.35a already running
job Components.Task.Job name=SoftcamCheck #tasks=1 completed with [] in None
allocate channel.. 07d9:0002
available channel.. 0020:f020
opening frontend 0
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 0 Freq 11876000 Pol 0 SR 27500000 INV 2 FEC 2 orbpos 282 system 0 modulation 1 pilot 2, rolloff 0
tuning to 1276 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:1840:7D9:2:11A0000:0:0:0:
allocate demux
[SEC] set static current limiting
set sequence pos 3
set sequence pos 4
[SEC] setVoltage 2
[SEC] sleep 200ms
[SEC] invalidate current switch params
[SEC] sendDiseqc: e00000(DiSEqC reset)
[SEC] sleep 50ms
[SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
[SEC] sleep 150ms
[SEC] sendDiseqc: e01038fb(?)
[SEC] sleep 50ms
set sequence pos 3
[SEC] setTone 1
[SEC] sleep 10ms
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] sleep 500ms
(0)fe event: status 1e, inversion off, m_tuning 2
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x22a6b10 running
[eEPGCache] channel 0x22a6b10 running
[EPGC] next update in 2 sec
stop release channel timer
ok ... now we start!!
STREAM service event 6
tuned..
PATready
use pmtpid 0114 for service_id 1840
STREAM service event 5
start streaming...
STREAM: have 1 video stream(s) (091d), and 2 audio stream(s) (091e, 091f) (0920), and the pcr pid is 091d, and the text pid is 0920
ADD PID: 0000
ADD PID: 0012
ADD PID: 0014
ADD PID: 0114
ADD PID: 091d
ADD PID: 091e
ADD PID: 091f
ADD PID: 0920
setIoPrio realtime level 7 ok
[eFilePushThreadRecorder] THREAD START
[eDVBCAService] new service 1:0:1:1840:7D9:2:11A0000:0:0:0:
[eDVBCAService] add demux 1 to slot 0 service 1:0:1:1840:7D9:2:11A0000:0:0:0:
[eDVBCIInterfaces] gotPMT
[SEC] set dynamic current limiting
sdt update done!
[EPGC] start caching events(1414953902)
[eFilePushThreadRecorder] Warning: All write buffers busy
[eDVBRecordFileThread] cancelling
[eDVBRecordStreamThread] failed to cancel, killing all waiting IO
[eDVBRecordFileThread] poll: aio_return returned failure: Interrupted system call
[eDVBRecordFileThread] poll: aio_return returned failure: Interrupted system call
[eDVBRecordFileThread] poll: aio_return returned failure: Interrupted system call
[eDVBRecordFileThread] Waiting for I/O to complete
[eDVBLocalTimerHandler] diff is 1
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] set RTC Time
[eDVBLocalTimerHandler] update RTC
[eDVBLocalTimerHandler] time update to 18:45:10
[eDVBLocalTimerHandler] m_time_difference is 1
[eDVBLocalTimerHandler] set Linux Time
[EPGC] abort non avail schedule reading
[EPGC] abort non avail schedule other reading
[EPGC] abort non avail virgin nownext reading
[EPGC] abort non avail virgin schedule reading
[EPGC] abort non avail netmed schedule reading
[EPGC] abort non avail netmed schedule other reading
[EPGC] abort non avail FreeSat schedule_other reading
[EPGC] abort non avail viasat reading
[EPGC] nownext finished(1414953910)
[EPGC] stop caching events(1414953910)
[EPGC] next update in 60 min
[eFilePushThreadRecorder] Warning: All write buffers busy
[eDVBRecordFileThread] cancelling
[eDVBRecordStreamThread] failed to cancel, killing all waiting IO
[eDVBRecordFileThread] poll: aio_return returned failure: Interrupted system call
[eDVBRecordFileThread] poll: aio_return returned failure: Interrupted system call
[eDVBRecordFileThread] poll: aio_return returned failure: Interrupted system call
[eDVBRecordFileThread] Waiting for I/O to complete
[eFilePushThreadRecorder] Warning: All write buffers busy
[eDVBRecordFileThread] cancelling
[eDVBRecordStreamThread] failed to cancel, killing all waiting IO
[eDVBRecordFileThread] poll: aio_return returned failure: Interrupted system call
[eDVBRecordFileThread] poll: aio_return returned failure: Interrupted system call
[eDVBRecordFileThread] poll: aio_return returned failure: Interrupted system call
[eDVBRecordFileThread] Waiting for I/O to complete
[eFilePushThreadRecorder] Warning: All write buffers busy
[eDVBRecordFileThread] cancelling
[eDVBRecordStreamThread] failed to cancel, killing all waiting IO
[eDVBRecordFileThread] poll: aio_return returned failure: Interrupted system call
[eDVBRecordFileThread] poll: aio_return returned failure: Interrupted system call
[eDVBRecordFileThread] poll: aio_return returned failure: Interrupted system call
[eDVBRecordFileThread] Waiting for I/O to complete
stop streaming
[eDVBRecordFileThread] poll: aio_return returned failure: Interrupted system call
[eFilePushThreadRecorder] WRITE ERROR, aborting thread
[eDVBRecordStreamThread] cancelling aio
[eDVBRecordStreamThread] all done
[eDVBRecordFileThread] waiting for aio to complete
[eDVBRecordFileThread] wait: aio_return returned failure: Interrupted system call
[eDVBRecordFileThread] wait: aio_return returned failure: Interrupted system call
[eDVBRecordFileThread] buffer usage histogram (4 buffers of 188 kB)
* * * 0:* * * 1
* * * 1:* * *16
* * * 2:* * *14
* * * 3:* * *40
* * * 4:* * * 4
[eFilePushThreadRecorder] THREAD STOP
[eFilePushThreadRecorder] stopping thread.
send signal to non running thread
thread joined 0
stop streaming
[eDVBCAService] free slot 0 demux 1 for service 1:0:1:1840:7D9:2:11A0000:0:0:0:
[eDVBCAService] free service 1:0:1:1840:7D9:2:11A0000:0:0:0:
start release channel timer
poll: unhandled POLLERR/HUP/NVAL for fd 24(24)
release cached channel (timer timeout)
[eDVBLocalTimerHandler] remove channel 0x22a6b10
[eEPGCache] remove channel 0x22a6b10
stop release channel timer
close frontend 0
allocate channel.. 07d9:0002
available channel.. 0020:f020
opening frontend 0
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 0 Freq 11876000 Pol 0 SR 27500000 INV 2 FEC 2 orbpos 282 system 0 modulation 1 pilot 2, rolloff 0
tuning to 1276 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:1840:7D9:2:11A0000:0:0:0:
allocate demux
[SEC] set static current limiting
set sequence pos 3
set sequence pos 4
[SEC] setVoltage 2
[SEC] sleep 200ms
[SEC] invalidate current switch params
[SEC] sendDiseqc: e00000(DiSEqC reset)
[SEC] sleep 50ms
[SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
[SEC] sleep 150ms
[SEC] sendDiseqc: e01038fb(?)
[SEC] sleep 50ms
set sequence pos 3
[SEC] setTone 1
[SEC] sleep 10ms
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] sleep 500ms
(0)fe event: status 1e, inversion off, m_tuning 2
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x22a6850 running
[eEPGCache] channel 0x22a6850 running
[EPGC] next update in 59 min
stop release channel timer
ok ... now we start!!
STREAM service event 6
tuned..
PATready
use pmtpid 0114 for service_id 1840
[eDVBLocalTimerHandler] diff is 0
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] not changed
STREAM service event 5
start streaming...
STREAM: have 1 video stream(s) (091d), and 2 audio stream(s) (091e, 091f) (0920), and the pcr pid is 091d, and the text pid is 0920
ADD PID: 0000
ADD PID: 0012
ADD PID: 0014
ADD PID: 0114
ADD PID: 091d
ADD PID: 091e
ADD PID: 091f
ADD PID: 0920
setIoPrio realtime level 7 ok
[eFilePushThreadRecorder] THREAD START
[eDVBCAService] new service 1:0:1:1840:7D9:2:11A0000:0:0:0:
[eDVBCAService] add demux 1 to slot 0 service 1:0:1:1840:7D9:2:11A0000:0:0:0:
[eDVBCIInterfaces] gotPMT
[eDVBCAService] don't build/send the same CA PMT twice
[SEC] set dynamic current limiting
sdt update done!
stop streaming
[eFilePushThreadRecorder] stopping thread.
[eFilePushThreadRecorder] *read error* (Bad file descriptor) - aborting thread because i don't know what else to do.
[eDVBRecordStreamThread] cancelling aio
[eDVBRecordStreamThread] not all cancelled
[eDVBRecordFileThread] waiting for aio to complete
[eDVBRecordFileThread] Waiting for I/O to complete
main thread is non-idle! display spinner!
[eDVBRecordFileThread] wait: aio_return returned failure: Bad file descriptor
[eDVBRecordFileThread] wait: aio_return returned failure: Bad file descriptor
[eDVBRecordFileThread] buffer usage histogram (4 buffers of 188 kB)
* * * 1:* * * 1
* * * 2:* * * 4
* * * 3:* * * 3
[eFilePushThreadRecorder] THREAD STOP
thread joined 0
stop streaming
[eDVBCAService] free slot 0 demux 1 for service 1:0:1:1840:7D9:2:11A0000:0:0:0:
[eDVBCAService] free service 1:0:1:1840:7D9:2:11A0000:0:0:0:
start release channel timer
[AutoTimer] Auto Poll
[AutoTimer] Auto Poll Started
[AutoTimer] No changes in configuration, won't parse
job Components.Task.Job name=AutoTimer #tasks=0 completed with [] in None
[SoftcamManager] mgcamd.1.35a already running
[eDVBLocalTimerHandler] diff is -5
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] difference between linux time and RTC time is < 60 sec... so the transponder time looks ok
[eDVBLocalTimerHandler] time update to 19:02:21
[eDVBLocalTimerHandler] m_time_difference is -5
[eDVBLocalTimerHandler] set Linux Time
ERROR reading PES (fd=61) - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 61(8)
job Components.Task.Job name=SoftcamCheck #tasks=1 completed with [] in None
release cached channel (timer timeout)
[eDVBLocalTimerHandler] remove channel 0x22a6850
[eEPGCache] remove channel 0x22a6850
stop release channel timer
allocate channel.. 07ec:0002
available channel.. 0020:f020
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 1 Freq 12246000 Pol 1 SR 29500000 INV 2 FEC 3 orbpos 282 system 1 modulation 1 pilot 2, rolloff 1
tuning to 1646 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:19:EE6:7EC:2:11A0000:0:0:0:
allocate demux
[SEC] set static current limiting
stop streaming
stop streaming
start release channel timer
[SEC] setTone 0
[SEC] sleep 25ms
[SEC] setVoltage 1
[SEC] sleep 20ms
set sequence pos 3
[SEC] invalidate current switch params
[SEC] sendDiseqc: e01038f9(?)
[SEC] sleep 50ms
set sequence pos 3
[SEC] setTone 1
[SEC] sleep 10ms
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] sleep 500ms
(0)fe event: status 1e, inversion off, m_tuning 2
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x229d050 running
[eEPGCache] channel 0x229d050 running
[EPGC] next update in 2 sec
stop release channel timer
[SEC] set dynamic current limiting
[EPGC] start caching events(1414954944)
[eDVBLocalTimerHandler] diff is 5
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] set RTC Time
[eDVBLocalTimerHandler] update RTC
[eDVBLocalTimerHandler] time update to 19:02:30
[eDVBLocalTimerHandler] m_time_difference is 5
[eDVBLocalTimerHandler] set Linux Time
[EPGC] abort non avail schedule reading
[EPGC] abort non avail schedule other reading
[EPGC] abort non avail virgin nownext reading
[EPGC] abort non avail virgin schedule reading
[EPGC] abort non avail netmed schedule reading
[EPGC] abort non avail netmed schedule other reading
[EPGC] abort non avail FreeSat schedule_other reading
[EPGC] abort non avail viasat reading
[EPGC] nownext finished(1414954956)
[EPGC] stop caching events(1414954956)
[EPGC] next update in 60 min
[SoftcamManager] mgcamd.1.35a already running
job Components.Task.Job name=SoftcamCheck #tasks=1 completed with [] in None
[SoftcamManager] mgcamd.1.35a already running
job Components.Task.Job name=SoftcamCheck #tasks=1 completed with [] in None
[LogManager] Trim Poll Started
job Components.Task.Job name=LogManager #tasks=1 completed with [] in None
[NTP]: setting E2 time: 1414955681.43
set RTC to 2014/11/02 19:14 (rtc_offset = 7200 sec.)
[MetrixWeather] lookup for ID 640161
KEY: 139 MENU
action ->* InfobarMenuActions mainMenu
KEY: 139 MENU
KEY: 103 UP
KEY: 103 UP
KEY: 103 UP
KEY: 103 UP
KEY: 352 OK
action ->* OkCancelActions ok
KEY: 352 OK
KEY: 103 UP
KEY: 103 UP
KEY: 108 DOWN
KEY: 108 DOWN
KEY: 352 OK
action ->* OkCancelActions ok
KEY: 352 OK
KEY: 103 UP
KEY: 103 UP
KEY: 103 UP
KEY: 103 UP
KEY: 103 UP
KEY: 103 UP
KEY: 103 UP
KEY: 103 UP
KEY: 103 UP
KEY: 103 UP
KEY: 103 UP
KEY: 103 UP
KEY: 103 UP
KEY: 103 UP
KEY: 103 UP
KEY: 103 UP
KEY: 103 UP
KEY: 103 UP
KEY: 352 OK
action ->* OkCancelActions ok
KEY: 352 OK
KEY: 108 DOWN
KEY: 108 DOWN
KEY: 352 OK
action ->* OkCancelActions ok
warning, skin is missing element LogsSize in <class 'Screens.LogManager.LogManager'>
KEY: 352 OK
KEY: 398 RED
KEY: 398 RED
action ->* ColorActions red
KEY: 398 RED
KEY: 398 RED
action ->* ColorActions red
KEY: 398 RED
KEY: 398 RED
action ->* ColorActions red
KEY: 401 BLUE
KEY: 401 BLUE
action ->* ColorActions blue
KEY: 352 OK
action ->* MsgBoxActions ok
KEY: 352 OK
KEY: 108 DOWN
action ->* DirectionActions down
KEY: 108 DOWN
KEY: 352 OK
action ->* MsgBoxActions ok
KEY: 352 OK