does anyone know how to set oscam for virgin media and sly uk onto my vu duo2 box.. i try sooo many ways and doesnt work
does anyone know how to set oscam for virgin media and sly uk onto my vu duo2 box.. i try sooo many ways and doesnt work
2014/10/04 01:03:20 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9620 (mipsel-oe-linux)
2014/10/04 01:03:20 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 31440
2014/10/04 01:03:20 0 s services reloaded: 0 services freed, 2 services loaded, rejected 0
2014/10/04 01:03:20 0 s userdb reloaded: 3 accounts loaded, 0 expired, 0 disabled
2014/10/04 01:03:20 0 s signal handling initialized
2014/10/04 01:03:20 0 s 887 service-id's loaded in 4ms
2014/10/04 01:03:20 0 s monitor: initialized (fd=4, port=18001)
2014/10/04 01:03:20 0 s newcamd: initialized (fd=5, port=18850)
2014/10/04 01:03:20 0 s -> CAID: 0963 PROVID: 000000
2014/10/04 01:03:20 0 s newcamd: initialized (fd=6, port=18851)
2014/10/04 01:03:20 0 s -> CAID: 1841 PROVID: 000000
2014/10/04 01:03:20 0 s cccam: initialized (fd=7, port=12000)
2014/10/04 01:03:20 0 s skyuk [internal] creating thread for device /dev/sci0
2014/10/04 01:03:20 0 s cable_uk [internal] creating thread for device /dev/sci1
2014/10/04 01:03:20 0 s waiting for local card init
2014/10/04 01:03:20 585410 r cable_uk [internal] ERROR: Opening device /dev/sci1 (errno=16 Device or resource busy)
2014/10/04 01:03:20 585410 r cable_uk [internal] Cannot open device: /dev/sci1
2014/10/04 01:03:20 583680 r skyuk [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=375, cardmhz=375)
2014/10/04 01:03:20 76A00468 h webif: decompressed 143554 bytes back into 353368 bytes
2014/10/04 01:03:20 76A00468 h HTTP Server running. ip=192.168.1.228 port=18800
2014/10/04 01:03:21 583680 r skyuk [internal] card detected
2014/10/04 01:03:21 583680 r skyuk [internal] ATR: 00 00
2014/10/04 01:03:21 583680 r skyuk [internal] ERROR: Could not read reader->convention
2014/10/04 01:03:21 583680 r skyuk [internal] Error activating card.
2014/10/04 01:03:21 583680 r skyuk [internal] ATR: 00 00
2014/10/04 01:03:21 583680 r skyuk [internal] ERROR: Could not read reader->convention
2014/10/04 01:03:21 583680 r skyuk [internal] Error activating card.
2014/10/04 01:03:22 583680 r skyuk [internal] ATR: 00 00
2014/10/04 01:03:22 583680 r skyuk [internal] ERROR: Could not read reader->convention
2014/10/04 01:03:22 583680 r skyuk [internal] Error activating card.
2014/10/04 01:03:22 583680 r skyuk [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/10/04 01:03:22 583680 r skyuk [internal] card initializing error
2014/10/04 01:04:20 585410 r cable_uk [internal] ERROR: Opening device /dev/sci1 (errno=16 Device or resource busy)
2014/10/04 01:04:20 585410 r cable_uk [internal] Cannot open device: /dev/sci1
2014/10/04 01:05:20 585410 r cable_uk [internal] ERROR: Opening device /dev/sci1 (errno=16 Device or resource busy)
2014/10/04 01:05:20 585410 r cable_uk [internal] Cannot open device: /dev/sci1
2014/10/04 01:06:20 585410 r cable_uk [internal] ERROR: Opening device /dev/sci1 (errno=16 Device or resource busy)
2014/10/04 01:06:20 585410 r cable_uk [internal] Cannot open device: /dev/sci1
2014/10/04 01:07:20 585410 r cable_uk [internal] ERROR: Opening device /dev/sci1 (errno=16 Device or resource busy)
2014/10/04 01:07:20 585410 r cable_uk [internal] Cannot open device: /dev/sci1
2014/10/04 01:08:20 585410 r cable_uk [internal] ERROR: Opening device /dev/sci1 (errno=16 Device or resource busy)
2014/10/04 01:08:20 585410 r cable_uk [internal] Cannot open device: /dev/sci1
It does work, there is more than enough info on these forums as it is, get your cable working first, there is a post by Bassethound with a working config, then create another user group for sat. dvbapiuser is your missing link.
Let me get my setting to show you
All PM,s asking about c/s on cable will be ignored and reported to forum staff!
There is no information on this forum on how to get your own cable card working in oscam. The information referred to above is for other methods.
You should be able to get your Skycard to work in oscam - but you need to read up how to set up the oscam.conf, server & user files.
I don't understand why you have mentioned newcamd.list - that file is only needed for other methods, and not what you asked about in your first post.
still not happening...
Hide/Reset Reader/User AU Address Port Protocol CAID:SRVID Current Channel LB Value/Reader Online & Idle* Status
Readers 0/1
Hide Reader Restart Reader skyuk skyuk ON 127.0.0.1 0 internal 0000:0000 no data 00:01:12
00:01:12 ERROR
(no entitlements)
Proxies 0/1
Hide Proxy Restart Proxy cable_uk cable_uk OFF 192.168.1.228 18851 newcamd 0000:0000 no data 00:01:03
00:01:03 UNKNOWN
Clients 1/1
Hide User Kill this User dvbapiuser dvbapiuser OFF 0.0.0.0 0 dvbapi 1841:0A2C not found (2ms) 00:01:08
00:00:01 OK
2014/10/05 00:56:28 5A4A60 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 1 ecmpids!
2014/10/05 00:56:28 5A4A60 c [DVBAPI] Demuxer #0 trying to descramble PID #0 CAID 1841 PROVID 000000 ECMPID 167A ANY CHID PMTPID 0025 VPID 0199
2014/10/05 00:56:28 5A4A60 c dvbapiuser (1841&000000/0000/0A2C/89:14324ACAB2362D9C568B798A408CE4BD): rejected group (1 ms) (no matching reader)
2014/10/05 00:56:28 5A4A60 c dvbapiuser (1841&000000/0000/0A2C/89:14324ACAB2362D9C568B798A408CE4BD): rejected group (2 ms) (no matching reader)
2014/10/05 00:56:28 5A4A60 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 1 ecmpids!
2014/10/05 00:56:29 5A4A60 c [DVBAPI] Demuxer #0 trying to descramble PID #0 CAID 1841 PROVID 000000 ECMPID 167A ANY CHID PMTPID 0025 VPID 0199
2014/10/05 00:56:29 5A4A60 c dvbapiuser (1841&000000/0000/0A2C/89:14324ACAB2362D9C568B798A408CE4BD): rejected group (1 ms) (no matching reader)
2014/10/05 00:56:29 5A4A60 c dvbapiuser (1841&000000/0000/0A2C/89:14324ACAB2362D9C568B798A408CE4BD): rejected group (2 ms) (no matching reader)
2014/10/05 00:56:29 5A4A60 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 1 ecmpids!
2014/10/05 00:56:29 5A4A60 c [DVBAPI] Demuxer #0 trying to descramble PID #0 CAID 1841 PROVID 000000 ECMPID 167A ANY CHID PMTPID 0025 VPID 0199
2014/10/05 00:56:30 5A4A60 c dvbapiuser (1841&000000/0000/0A2C/89:736E8A23BF2F83152F890812DE11B3AF): rejected group (1 ms) (no matching reader)
2014/10/05 01:25:14 583600 r skyuk [internal] card detected
2014/10/05 01:25:14 583600 r skyuk [internal] ATR: 3F FD 13 25 02 50 00 0F 33 B0 0F 69 FF 4A 50 D0 00 00 53 59 02
2014/10/05 01:25:14 583600 r skyuk [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2014/10/05 01:25:14 583600 r skyuk [internal] Calculated work ETU is 24.80 us reader mhz = 375
2014/10/05 01:25:19 583600 r skyuk [internal] ATR Fsmax is 5 MHz, clocking card to 3.75 (specified in reader->mhz)
2014/10/05 01:25:20 583600 r skyuk [internal] Card type: SYAV
2014/10/05 01:25:20 583600 r skyuk [internal] Rom version: 40LF
2014/10/05 01:25:20 583600 r skyuk [internal] Credit available on card: 35 euro
2014/10/05 01:25:20 583600 r skyuk [internal] Region Code: NG2
2014/10/05 01:25:21 583600 r skyuk [internal] Pincode read: 8888
2014/10/05 01:25:21 583600 r skyuk [internal] PCB settings: FF FF FF 0
2014/10/05 01:25:21 583600 r skyuk [internal] type: VideoGuard BSkyB (0963), caid: 0963
2014/10/05 01:25:21 583600 r skyuk [internal] serial: ########, BoxID: ########, baseyear: 1997
2014/10/05 01:25:21 583600 r skyuk [internal] ready for requests
2014/10/05 01:25:21 583600 r skyuk [internal] found card system videoguard2
2014/10/05 01:25:21 583600 r skyuk [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2014/10/05 01:25:21 583600 r skyuk [videoguard2] card detected
2014/10/05 01:25:21 583600 r skyuk [videoguard2] type: VideoGuard BSkyB (0963)
2014/10/05 01:25:21 583600 r skyuk [videoguard2] tier: 0003, expiry date: 2014/09/21-01:00:00
2014/10/05 01:25:21 583600 r skyuk [videoguard2] tier: 000b, expiry date: 2014/09/21-01:00:00
2014/10/05 01:25:21 583600 r skyuk [videoguard2] tier: 0010, expiry date: 2014/09/21-01:00:00
2014/10/05 01:25:21 583600 r skyuk [videoguard2] tier: 001d, expiry date: 2014/09/21-01:00:00
2014/10/05 01:25:21 583600 r skyuk [videoguard2] tier: b765, expiry date: 2014/09/21-01:00:00
2014/10/05 01:25:21 583600 r skyuk [videoguard2] tier: b766, expiry date: 2014/09/21-01:00:00
2014/10/05 01:25:22 583600 r skyuk [videoguard2] tier: b772, expiry date: 2014/09/21-01:00:00
2014/10/05 01:25:22 583600 r skyuk [videoguard2] tier: b773, expiry date: 2014/09/21-01:00:00
2014/10/05 01:25:22 583600 r skyuk [videoguard2] tier: b846, expiry date: 2014/09/21-01:00:00
2014/10/05 01:25:22 583600 r skyuk [videoguard2] tier: b848, expiry date: 2014/09/21-01:00:00
2014/10/05 01:25:22 583600 r skyuk [videoguard2] tier: b860, expiry date: 2014/09/21-01:00:00
2014/10/05 01:25:22 583600 r skyuk [videoguard2] tier: b8d2, expiry date: 2014/09/21-01:00:00
2014/10/05 01:25:22 583600 r skyuk [videoguard2] tier: b968, expiry date: 2014/09/21-01:00:00
2014/10/05 01:25:27 0 s init for all local cards done
2014/10/05 01:25:27 0 s anti cascading disabled
2014/10/05 01:25:27 59F9B8 c plain dvbapi-client granted (dvbapiuser, au=off)
2014/10/05 01:25:27 59F9B8 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 0
oscam.conf
[global]
logfile = /dev/tty
nice = -1
maxlogsize = 50
preferlocalcards = 1
lb_mode = 1
lb_nbest_readers = 2
lb_reopen_seconds = 900
failbantime = 10
double_check = 1
[cache]
[newcamd]
key = 0102030405060708091011121314
port = 18850@0963:000000;18850@1841:000000
[cccam]
port = 12000
nodeid = 7086C3F5107A156C
version = 2.3.0
reshare = 1
stealth = 1
[dvbapi]
enabled = 1
user = dvbapiuser
[monitor]
port = 18001
nocrypt = 0.0.0.0-255.255.255.255
monlevel = 4
hideclient_to = 15
[webif]
httpport = 18800
serverip = 192.168.1.228
httpuser =
httppwd =
httprefresh = 30
httphideidleclients = 1
httpallowed = 0.0.0.0-255.255.255.255
hideclient_to = 15
oscam.server
[reader]
label = skyuk
protocol = internal
device = /dev/sci0
cacheex = 1
caid = 0963
boxid =
ecmwhitelist = 0963:AA,AC,AD,AE,A0,BC,BF,EA,EC,E2,F0,FC,FD,A1,A2, A3,A4,A5,A6,A7,A8,A9,B0,B1,B2,B3,B4,B6,B7,B9,BA,C1 ,C3,C4,C7,C8,C9,D2,DC,D4,D5,D8,E4,1B,1C,1E,14,15,1 8,19,2A,2B,2D,2E,2F,20,24,26,28,3A,3B,3E,3D,3F,30, 32,33,34,35,36,37,38,39,3C,4A,4B,4C,4D,4E,4F,40,41 ,42,43,44,45,46,47,48,49,5A,5C,5D,5E,5F,50,51,52,5 3,54,56,57,58,59,6A,6B,6C,6D,6E,6F,60,61,62,63,64, 65,66,67,68,69,7A,7B,7C,7D,7E,7F,70,71,72,73,74,76 ,77,78,79,8A,8B,8C,8D,8F,80,81,82,84,85,89,9A,9B,9 C,9D,9E,9F,90,91,92,93,94,96,98,99
detect = cd
mhz = 375
cardmhz = 375
ident = 0963:000000
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-g = 1
lb_weight = 101
dropbadcws = 1
ndsversion = 2
[reader]
label = cable_uk
protocol = newcamd
device = 192.168.1.228,18850
key = 0102030405060708091011121314
user = username
password = password
disableserverfilter = 1
caid = 1841
ident = 1841:000000
group = 2
audisabled = 1
oscam.user
[account]
user = dvbapiuser
group = 1
[account]
user =
pwd =
hostname =
caid = 0963
uniq = 2
monlevel = 2
expdate = 2015-12-31
allowedprotocols = newcamd
group = 1
ident = 0963:000000
numusers = 0
radja1 (05-10-14),victoriahenri (19-11-16)
Your Skycard has expired - see the line
2014/10/05 01:25:21 583600 r skyuk [videoguard2] tier: 0003, expiry date: 2014/09/21-01:00:00
You need to add the lines needed to update your card:
Add the line au = 1 to the [dvbapi] section.
Add the line au = skyuk to the [account] user = dvbapiuser section.
Restart your box and leave it on Sky One overight - if you are lucky (and if your card is still valid) you should get an EMM.
I have read many oscam guides and I have never seen one guide that lists all the lines necessary to get cards to update.
I will add that you might as well remove all the sections in your configuration files about your cable card - no one on this forum has the necessary knowledge to get a UK cable card to work in oscam.
If you can find it please point me to the relevant post that shows how to get a UK cable card to work in a VU+ box.
You will note that when the OP first posted and clearly asked how to get a UK cable card to work in a VU+ box there were no replies - except a reference to a post about the other method.
Last edited by timofee; 06-10-14 at 14:25.