c850 ??? is this repairable have you any ideas can it still be replaced? or am i reallly screwed!
c850 ??? is this repairable have you any ideas can it still be replaced? or am i reallly screwed!
Is it possible to use a 470uf 25v 105c capacitor for this fix?
It would be easier to stick to a 220µF capacitor with the same or higher voltage rating than the original. They are cheap enough!
Someone above used a 330uf capacitor and that was reported as being ok - but I don't see the point of using a 470uf unless it is absolutely impossible for you to obtain a 220uf
Great thread..this happened to my box last year and I put it in the loft thinking it was dead, been using an android box since. After reading this thread I got the box out, trip to maplins, followed the instructions and hey presto its working again...cant thank you guys enough.
Ive installed latest image and channel list...what plugins should I add?
Yes, great thread. I have been away from home for three months but left the Duo on recording programmes. The wife followed me away a month later. Came home yesterday.... Red light of death! Went to pull the Duo out of the shelf and noted glass table coasters over the top vent.... I've been using 2.3 on my 3 year old machine with just the odd crash as expected. My first thought before I started reading was that my internal 2Tb drive was full and that was the problem. Anyway, I guess I'll just do the cap. Cursing because I am in NZ having just returned from London and several visits to Maplin! Any Kiwis know where to get a new capacitor? Should I flash the latest Boot and version of Vix after this?
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
Brilliant piece of detective work originally that I expect is going to save me a bucket of time tomorrow. Must go shopping for some caps.
Thanks.
thanks mate worked for me thanks
Any special equipment needed to replace the regulator or best to get an expert to replace this?
It looks pretty small for a soldering iron..
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
I think the only thing you need is a 25watt soldering iron as a 15watt might be a little underpowered, some good quality solder a pair of small wire cutters and a steady hand
but if you are not feeling confident enough a TV repair shop should do it for you for about £20
This is not for the capacitor, it's the regulator U801. I don't think wire cutters are required for that chip..
I have already replaced C807 and no joy so now for the regulator but it's a little on the small side I reckon for my soldering skills.. I've asked a local TV repair guy and he says it needs some equipment that blows hot air over the regulator to soften the solder to be able to remove the faulty one and he hasn't gotten one. He reckons a regular soldering iron would be too clumsy..
I will search the net for a more specialised electronics guy to repair it..
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Sorry about that I thought you wanted to change the C807 capacitor
A rework station would be best as per your man. Mobile phone repair shops/diy enthusast should have one. Doesn't have to be specialist.
You should be able to do it with a soldering iron and some wick.
mcquaim (08-09-14)
Cheers Abu, I will take a look when the part arrives to see how brave I am.. If not I will look around to see who does this sort of thing in this area!
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Hi all,
My vu packed in as same in thread but I have a question.
Will the fan still power I when c807 has blown as I have replaced this and still nothing. Does this mean its the power supply?
Thanks
Hunty