hi
I am installing hard drive in lx3, there a wire attatched to the hard drive caddy and to the motherboard, it seems to come away from motherboard, does it just push back in place
hi
I am installing hard drive in lx3, there a wire attatched to the hard drive caddy and to the motherboard, it seems to come away from motherboard, does it just push back in place
WiFi aerial connector. Just clips on.
can anyone tell me best position for the hard drive to be fitted ie facing to the front or the rear or upside down
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
hard drive installed and working
what size Hard Drive are you fitting as it will take either a 2.5" or a 3.5" Drive I have a 2.5" fitted to mine with an adapter plate but a 2.5" will fit without one I have also tried my 3.5" 3TB Drive from my Duo2 and that worked fine so it will take up to 3TB without problem here are some pics of mine in the LX3
20140720_154752.jpg 20140720_154845.jpg 20140720_154921.jpg 20140720_154805.jpg
Looks like I was a little bit late lol
thor1 (29-08-14)
I fitted WD 2tb Purple seems to working OK
That will be fine as I think that it runs at 5500rpm so will run cooler a 7200rpm will also work but speed is not really necessary
5500 speed is also quieter which is also important in a PVR. The 2.5" drives are even quieter than the 3.5" - I can't hear the one in my Quad+ unless I'm directly beside it, plus no fan noise either!
GB Quad Plus, Mut@nt HD51, AX HD61, 80cm dish and Supreme Dark motor. Sony TA-AN1000, Sony UBP-X800M2 Bluray, Odroid N2+ (CoreElec), Monitor Audio Bronze 5.1 speakers
Support The Sponsor - Buy from the best HERE
Please abide by the rules - have a read HERE
VIX manual & guides >>HERE
Download images from >> HERE
New Box Setup Guide >>HERE
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
PM HELP WILL BE IGNORED PLEASE POST HERE IN FORUM AS IT BENEFITS EVERYONE
Follow us on Twitter
NO CARD SHARING TALK WILL BE TOLERATED, LAN OR WAN! IN OPEN FORUM OR PM
IF THE POSTS HELP PLEASE CLICK THANKS OR ADD TO REP ?
Hello Stanman I tried taking a few with my S3 they turned out Ok-ish
the shot of the Screen on its own was taken with No flash and in candle light mode I also took one of my Duo2 so you can see the difference
the screens will still be set in their Default settings as I have not changed them since loading 26 in
the last pic is the Duo2 display the LX3's is much clearer a very nice display and it has no halo it's about 3 inches by about 1 and a half
ps/ excuse the Dust lol
20140829_211606.jpg 20140829_212305.jpg 20140829_212637.jpg
Last edited by nsw9154; 29-08-14 at 21:48.